Table of Contents
Advertisement
Quick Links
Flo-Dynamics
ProMax40™
®
INTRODUCTION TO THE MACHINE .......................................... 2
I.
SAFETY INFORMATION ....................................................... 3
Important Safety Notice....................................... 3
Important Safety Instructions............................... 5
II. FEATURES & SPECIFICATIONS ......................................... 9
Features................................................................ 9
Specifications.................................................. 10
Machine Overview............................................... 11
III. OPERATING INSTRUCTIONS ............................................. 12
IV. TROUBLESHOOTING & MAINTENANCE ......................... 20
Common Problems / Solutions ........................... 20
Maintenance Procedures .................................... 20
V. REPLACEMENT PARTS ...................................................... 18
WARRANTY ............................................................................... 20
CUSTOMER SERVICE CONTACT INFORMATION
For product information, tech support, or to order replacement parts, call:
1-800-303-5874
Operations Manual
TABLE OF CONTENTS
Printed in the U.S.A. for Flo-Dynamics ®
Table of Contents
1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for FLO-DYNAMICS PROMAX40
Summary of Contents for FLO-DYNAMICS PROMAX40
-
Page 1: Table Of Contents
Maintenance Procedures ........20 - Section 4.02: V. REPLACEMENT PARTS ............18 WARRANTY ................20 CUSTOMER SERVICE CONTACT INFORMATION For product information, tech support, or to order replacement parts, call: 1-800-303-5874 Operations Manual Printed in the U.S.A. for Flo-Dynamics ®... - Page 2 • It operates off the 12-volt battery of the vehicle being serviced. • It does not require a pit, lift, or ramp. • The ProMax40 hooks up directly to one of the vehicle’s transmission cooler lines for a transmission fluid exchange.
-
Page 3: Safety Information
The safety messages presented below and throughout this user’s manual are reminders to the operator to exercise care when using this unit. Before using your ProMax40, always refer to and follow the safety messages and applicable service procedures provided by the manufacturer of the vehicle being serviced. - Page 4 Risk of Fire Read Instructions Before Use Risk of Explosion Mandatory Eye Protection Risk of Entanglement Mandatory Protective Gloves Dangerous Fumes Mandatory Protective Clothing Do Not Pull or Move Operations Manual Printed in the U.S.A. for Flo-Dynamics ®...
-
Page 5: Section 1.02: Important Safety Instructions
Improper use and operation. • Read, understand and follow all safety messages and operational procedures in this manual before operating the Flo-Dynamics ProMax40. • This equipment should be operated only by qualified personnel. • Use this equipment only as described in this manual. - Page 6 Contact with moving parts can cause injury. Risk of fire or explosion. • Do not operate the ProMax40 in the vicinity of open containers of flammable liquids such as gasoline. • Keep hoses and jumper cables away from heat sources and sharp edges.
- Page 7 “Appendix C – Replacement Parts” to order new hoses. • The use of any other accessories not specified in this manual may create a hazard. Tools that slip or break can cause injury. Operations Manual Printed in the U.S.A. for Flo-Dynamics ®...
- Page 8 • Care should be taken to arrange the battery cables and service hoses so that they will not be tripped over or pulled. • Never pull on the power cables or service hoses to transport the ProMax40. Damage may occur to these components, or machine may tip over.
-
Page 9: Features & Specifications
• Totalizer check (indicates lifetime use) • Interactive options menu: - “Auto Prime” feature automatically primes the system - Indicate new fluid volume - Indicate waste fluid capacity - Read battery voltage Operations Manual Printed in the U.S.A. for Flo-Dynamics ®... -
Page 10: Section 2.02: Specifications
140 lbs TECHNICAL SPECIFICATIONS: Power: 12-Volt DC from vehicle battery Fuse: 15 Amp Fluid Sensors: +/- 3% accurate sensors Filters: 25-micron absolute fluid filters Operating Temperature: 60º to 150ºF (15º to 65ºC) Operations Manual Printed in the U.S.A. for Flo-Dynamics ®... -
Page 11: Section 2.03: Machine Overview
Flo-Dynamics ProMax40™ II. Features & Specifications ® 2.03 MACHINE OVERVIEW Operations Manual Printed in the U.S.A. for Flo-Dynamics ®... -
Page 12: Operating Instructions
Use the yellow ▲▼arrow keys to select the desired amount to be exchanged. Press the Green Button to proceed. Operations Manual Printed in the U.S.A. for Flo-Dynamics ®... - Page 13 If the exchange stops and the display reads “Halted – Reverse Hoses”, push or pull the knob on the flow diverter valve to switch directions, and press the Green Button to resume the exchange. Operations Manual Printed in the U.S.A. for Flo-Dynamics ®...
-
Page 14: Additional Functions
Connect the red and black service hoses together using any two mating adapters. Press the Green Button to begin the process. The unit will shut off when complete. Operations Manual Printed in the U.S.A. for Flo-Dynamics ®... - Page 15 VOLTAGE MONITOR From the main menu, press ▼ to proceed to the next menu. Press 8 to display the voltage. Operations Manual Printed in the U.S.A. for Flo-Dynamics ®...
- Page 16 Green Button. The exchange will resume where it left off. CYCLE VALVES From the main menu, press ▼ to proceed to the next menu. Press 9 to cycle the valves. Operations Manual Printed in the U.S.A. for Flo-Dynamics ®...
-
Page 17: Troubleshooting & Maintenance
This helps eliminate surface tension caused by debris and contamination from the air. Using a sharp pick, remove screen. Clean using degreaser and brush, and blow out with air compressor. • Periodically Wipe Down Exterior using a soft, damp cloth. Operations Manual Printed in the U.S.A. for Flo-Dynamics ®... -
Page 18: Replacement Parts
V. Replacement Parts Flo-Dynamics ProMax40™ ® V. REPLACEMENT PARTS Operations Manual Printed in the U.S.A. for Flo-Dynamics ®... - Page 19 ADAPTER 6SAE X 1,2 MALE JIC 942113 TANK CAP 943079 OVERLAY-SERV PANEL UNIV TS700 40200740 ELECTRONIC BOARD - TRANS MACHINES 40201206 OVERLAY CONTROL PANEL - PROMAX40 LCD 40201207 OVERLAY SERVICE PANEL - PROMAX40 LCD 40300391 PROMAX LCD CONTROL PANEL P941611 MANIFOLD BRKT-BLACK PROMAX P941612...
-
Page 20: Limited One (1) Year Warranty
LIMITED ONE (1) YEAR WARRANTY Flo-Dynamics ProMax40 Flo-Dynamics warrants only to the original Purchaser that under normal use, care and service, the Equipment (except as otherwise provided herein) shall be free from defects in material and workmanship for one year from the date of original invoice. External hoses, remote control modules, adapters and all other attachments, supplies and consumables (except as otherwise provided herein) are warranted for 90 calendar days from the date of original invoice.
Need help?
Do you have a question about the PROMAX40 and is the answer not in the manual?
Questions and answers