1. Manuals
  2. Brands
  3. ABSCO SHEDS Manuals
  4. Outdoor Storage
  5. 15301NK
  6. Assembly & instruction manual

ABSCO SHEDS 15301NK Assembly & Instruction Manual

Narrow shed
Hide thumbs

Advertisement

Table of Contents

AU: 1800 029 701
N Z: 0800 466 444
'Config A'
shown
This shed kit can be built two ways!
Choose roof
slope direction
to suit your site.
Config A
Please make a decision now and read
ahead to get a good understanding of
the steps required before beginning
contruction.
• Pages 1 to 14 are common
• Pages 15 to 19 are Config A specific
• Pages 20 to 24 are Config B specific
DOWNLOAD
OUR APP FOR
ASSEMBLY
VIDEOS
*Most models available
Absco Industries
Assembly Instruction Manual
ABSCO NARROW SHED
MODEL: 15301NK
1.52m W x 3.00m D x 2.06m H
admin@absco.com.au
www.abscosheds.com.au
Config B
For construction in non-cyclonic areas
Wind rating: "N2" as per AS4055-2021
("Medium M" to NZS3604-2011)
If you require a higher wind rating please contact us:
admin@absco.com.au or 1800 029 701
Model: 15301NK
WALLS SIT
ON THIS LEVEL
RAISED FLOOR
INSIDE SHED
100
75
25
PLEASE LEAVE A REVIEW
Tell us about your experience!
Visit www.abscosheds.com.au/review
Overall slab base
dimensions for this
model are as shown
above.
Illustration not to
scale.
75
Dimensions are
millimeters (mm)
23/11/23
1.0
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 15301NK and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for ABSCO SHEDS 15301NK

Summary of Contents for ABSCO SHEDS 15301NK

  • Page 1 ABSCO NARROW SHED MODEL: 15301NK 1.52m W x 3.00m D x 2.06m H AU: 1800 029 701 admin@absco.com.au N Z: 0800 466 444 www.abscosheds.com.au ‘Config A’ shown This shed kit can be built two ways! WALLS SIT Overall slab base...
  • Page 2 ABSCO NARROW SHED MODEL: 15301NK 1.52m W x 3.00m D x 2.06m H GENERAL INSTRUCTIONS • Before commencing any assembly, read through these instructions in detail to gain a thorough understanding of assembly methods and associated details. • Unpack the carton and carefully identify and check off all the parts against the parts described and illustrated on "COMPONENTS PACKING LIST"...

  • Page 3: Components List

    ABSCO NARROW SHED MODEL: 15301NK 1.52m W x 3.00m D x 2.06m H COMPONENTS LIST Nominal sheet widths are shown +/- 2 mm is within tolerance DESCRIPTION PART # DESCRIPTION PART # STEEL SHEET STEEL SHEET 2034 x 773 mm...
  • Page 4 ABSCO NARROW SHED MODEL: 15301NK 1.52m W x 3.00m D x 2.06m H COMPONENTS LIST DESCRIPTION PART # DESCRIPTION PART # CHANNEL CHANNEL 81BL 81BR 1496.5 mm 1496.5 mm CHANNEL CHANNEL 81AL 81AR 1496.5 mm 1496.5 mm CHANNEL CHANNEL 1513 mm...
  • Page 5 ABSCO NARROW SHED MODEL: 15301NK 1.52m W x 3.00m D x 2.06m H SNAPTiTE ASSEMBLY GUIDE The Snaptite Assembly System locks end channels to all roof and wall sheets without the need for tools and fasteners. To assemble each panel, the perimeter channels are secured to the top and bottom of each panel.
  • Page 6 ABSCO NARROW SHED MODEL: 15301NK 1.52m W x 3.00m D x 2.06m H Guide on Joining Spliced Channels The text marked on all parts must be shown on the same side as each other JOIN>> JOIN>> <<JOIN JOIN>> Step 1.
  • Page 7 ABSCO NARROW SHED MODEL: 15301NK 1.52m W x 3.00m D x 2.06m H PRE-ASSEMBLY OF SPLICED CHANNELS Join together 12 x channel sections using 6 x channel joiners (Part CSJ) NOTE: Some channels may have holes in them - You will need to redrill holes where CSJ joining channel covers them.

  • Page 8: Rear Panel Assembly

    ABSCO NARROW SHED MODEL: 15301NK 1.52m W x 3.00m D x 2.06m H REAR PANEL ASSEMBLY 1x required. 1. Overlap two 30A sheets by one rib as shown. Turn one sheet so edge holes are to the outside as pictured.
  • Page 9 ABSCO NARROW SHED MODEL: 15301NK 1.52m W x 3.00m D x 2.06m H ROOF PANEL ASSEMBLY 1x required. 1. Layout and overlap sheets by one rib as shown. 2. Use 4x 10mm self tapping screws FAST001 per overlap, through the pre punched holes.
  • Page 10 ABSCO NARROW SHED MODEL: 15301NK 1.52m W x 3.00m D x 2.06m H 2.0m H SIDE PANEL 1x required. 1. Layout and overlap sheets by one rib as shown. Orientate outside sheets as pictured. 2. Use 3x 10mm self tapping screws FAST001 per overlap, through the pre punched holes.

  • Page 11: Underside View

    ABSCO NARROW SHED MODEL: 15301NK 1.52m W x 3.00m D x 2.06m H 1.8m H SIDE PANEL 1x required. 1. Layout and overlap sheets by one rib as shown. Orientate outer sheets with holes to the outside as pictured. 2. Use 2x 10mm self tapping screws FAST001 per overlap, through the pre punched holes.

  • Page 12: Door Panel Assembly

    ABSCO NARROW SHED MODEL: 15301NK 1.52m W x 3.00m D x 2.06m H DOOR PANEL ASSEMBLY 1. Position the DoorB sheet as shown and attach the top 1x required. and bottom channels using the SNAP-TiTE method. Make sure you have the shorter,...
  • Page 13 ABSCO NARROW SHED MODEL: 15301NK 1.52m W x 3.00m D x 2.06m H DOOR PANEL ASSEMBLY 8. Turn the door over as shown. CONTINUED 91As overlap here 9. Now we’ll fit the two 91A jamb door braces. Align the holes in the brace with holes in the door.

  • Page 14: Front Panel

    ABSCO NARROW SHED MODEL: 15301NK 1.52m W x 3.00m D x 2.06m H FRONT PANEL 1x required. 1. Orientate the 34A sheet as shown and place the 89A jamb on top. 2. Use 2x 10mm self tapping screws FAST001 per overlap, through the pre punched holes in the parts.
  • Page 15 ABSCO NARROW SHED MODEL: 15301NK 1.52m W x 3.00m D x 2.06m H ATTENTION! Config is listed The following pages show how to build the on each page ‘Config A’ version of the shed as pictured. here If you would like to build ‘Config B’ go to page 20.
  • Page 16 ABSCO NARROW SHED MODEL: 15301NK 1.52m W x 3.00m D x 2.06m H ATTACH GABLE PANELS FRONT PANEL ASSEMBLY 7. Turn the front panel over. CONTINUED 8. Take the 16L gable panel and align the hole pattern with the interior side of the 77J channel.
  • Page 17 ABSCO NARROW SHED MODEL: 15301NK 1.52m W x 3.00m D x 2.06m H ATTACH DOOR TO FRONT PANEL 1. Use the supplied 3 mm drill bit DRILL and go through these existing jamb holes and into the sheet behind. 2. Lay the door in the open position so the hinges dangle over their matching holes.

  • Page 18: Section View

    ABSCO NARROW SHED MODEL: 15301NK 1.52m W x 3.00m D x 2.06m H PANEL CONSTRUCTION 1. Start with the front panel, open the door to help stand it 2. Attach the 1.8m H side panel next. Sit the side wall channel inside the end wall channels as shown below.
  • Page 19 ABSCO NARROW SHED MODEL: 15301NK 1.52m W x 3.00m D x 2.06m H 5. Square up the shed walls. FINAL CONSTRUCTION Make sure they’re straight and check opposite corner-to-corner dimensions are equal. 6. Safely place roof panel on top and align roof sheet holes with...
  • Page 20 ABSCO NARROW SHED MODEL: 15301NK 1.52m W x 3.00m D x 2.06m H The following pages show how to build the Config is listed ‘Config B’ version of the shed as pictured. on each page here If you would like to build ‘Config A’ go back to page 15.
  • Page 21 ABSCO NARROW SHED MODEL: 15301NK 1.52m W x 3.00m D x 2.06m H ATTACH GABLE PANELS FRONT PANEL ASSEMBLY 7. Turn the front panel over. CONTINUED 8. Take the 16R gable panel and align the hole pattern with the interior side of the 77E channel.
  • Page 22 ABSCO NARROW SHED MODEL: 15301NK 1.52m W x 3.00m D x 2.06m H ATTACH DOOR TO FRONT PANEL 1. Use the supplied 3 mm drill bit DRILL and go through these existing jamb holes and into the sheet behind. 2. Lay the door in the open position so the hinges dangle over their matching holes.
  • Page 23 ABSCO NARROW SHED MODEL: 15301NK 1.52m W x 3.00m D x 2.06m H PANEL CONSTRUCTION 1. Start with the front panel, open the door to help stand it 2. Attach the 1.8m H side panel next. Sit the side wall channel inside the end wall channels as shown below.
  • Page 24 ABSCO NARROW SHED MODEL: 15301NK 1.52m W x 3.00m D x 2.06m H FINAL CONSTRUCTION 5. Square up the shed walls. Make sure they’re straight and check opposite corner-to-corner dimensions are equal. 6. Safely place roof panel on top and align roof sheet holes with...
  • Page 25 Absco Sheds Storage Guidelines • Absco Sheds are designed to be weatherproof for normal weather conditions. In the event of extreme weather conditions such as heavy rain, combined with high wind gusts, the ridge capping, sheeting joins, screw fi xings etc., may exhibit minor deformations which may allow some water entry. These areas should be checked regularly to ensure that maximum strength and protection is maintained.
  • Page 26 ABSCO NARROW SHED MODEL: 15301NK 1.52m W x 3.00m D x 2.06m H Absco Skillion Roof Shed Notes General • 1.G This instruction manual shall be read in conjunction with other consultants drawings, specifi cations and written instructions provided by Absco and/or their representatives.
  • Page 27 ABSCO NARROW SHED MODEL: 15301NK 1.52m W x 3.00m D x 2.06m H Absco Skillion Roof Shed Notes Steelwork • 1.S All structural steelwork shall have a corrosion protection system applied consistent with AS/NZS 2312- 2002. • 2.S All structural steelwork detailed within this installation manual shall be minimum Grade 550 for roll formed sections (including roof and wall sheeting) and Grade 250 for angle sections.
  • Page 28 Lifetime Warranty Statement 1. DEFINITIONS 3. WARRANTY CLAIM PROCEDURE In this document, capitalised terms have the following meaning: 3.1. If, during the Lifetime Warranty Period, You believe the Product has a “ABSCO” means John Scholtes Investments (No. 1) Pty Ltd trading Defect, You must comply with the procedure set out in this clause 3.
  • Page 29 4. WARRANTY LIMITATIONS / EXCLUSIONS 4.1. To the extent permitted by law, this warranty will not apply where: the Product has been installed or used for a purpose that is not an Authorised Purpose; the Product has not been installed, assembled, maintained and/or special, indirect or consequential loss or damage of any nature operated in complete compliance with ABSCO’s Product Guide;...

This manual is also suitable for:

Wg15301nkZa15301nk

Table of Contents