Shark Clean & Empty PowerDetect Owner's Manual page 9

USING YOUR VACUUM
USING THE AUTO-EMPTY DOCK (IP3000 SERIES)
Place the vacuum on the dock in a downward
motion. Once properly attached, the
auto evacuation process will begin. The
evacuation cycle will last for 15 seconds.
QUIET MODE
Use Quiet Mode to dock and charge the
vacuum without automatic evacuation.
To activate Quiet mode, press the moon
switch on top of the charging post.
Note: Do not remove the vacuum while the evacuation cycle is taking place.
16
s h a r kc l e a n . c o . u k
Once evacuation is complete, the vacuum
will continue charging until it is removed
from the dock.
DUST BIN FULL INDICATOR
The Dust Bin Full indicator will illuminate
when the dust bin is full of debris and needs
to be emptied. To reset the indicator, remove
the dust bin and empty it.
MAINTAINING YOUR VACUUM
EMPTYING THE DOCK DUST BIN (IP3000 SERIES)
The dock dust bin holds up to 45 days' worth
of dust and debris. Empty the dock dust bin
when the dust bin full indicator light comes on.
To remove the bin, lift it out by the handle.
To empty the bin, hold it over the rubbish bin
and press the release button on the side. The
bottom will open to release the debris.
s h a r kc l e a n . c o . u k
17