Shark Clean & Empty PowerDetect Owner's Manual page 4

ASSEMBLY (IP3000 SERIES)
1. Slide the Wand onto the neck of the Floor
Nozzle until it clicks into place.
2. Align the Hand Vacuum nozzle opening
with the top of the wand and slide it on
until it clicks into place.
3. Make sure the Dock Base is facing upright.
Slide the Charging Post into the slot on
front of dock until it clicks.
Handheld
Vacuum
2.
(Click)
Flex Wand
Accessory
Storage
1.
(Click)
Floor Nozzle
6
s h a r kc l e a n . c o . u k
4. Place the dock on the floor near a wall
outlet. Plug the Power Cord into the outlet.
5. Store the crevice tool using Accessory
Storage on the dock.
6. Refer to pages 8 and 9 for Odour
Installation and Replacement instructions.
For proper operation, ensure all components
are completely connected and clicked
into place.
Charging Post
3.
(Click)
Odor Installation
Dock Base
NOTES
s h a r kc l e a n . c o . u k
7