Download Print this page

Shark Clean & Empty PowerDetect Owner's Manual page 8

Cordless vacuum

Advertisement

USING YOUR VACUUM
FLEXOLOGY
Flexology allows you to flex the wand to
reach under furniture and clean debris in
hard-to-reach areas.
To engage the Flexology feature, press
the unlock button on the back of your
Flex Wand.
For straight wand cleaning, return the wand
to its original angle. You will hear a click
when it is securely back in place.
14
s h a r kc l e a n . c o . u k
STORAGE
To put the vacuum into storage mode, press
the Flexology wand unlock button while
folding the handheld vacuum forward until
it is resting against the wand.
To release vacuum from storage mode,
unfold the vacuum until the wand
straightens and clicks securely back in
place.
USING YOUR VACUUM
ABOVE-FLOOR CLEANING
ABOVE-FLOOR WITH HAND VACUUM
Detach the hand vacuum to clean above-floor
areas. Press the front latch release button on
the hand vac where it meets the wand, then lift
off the hand vacuum. To attach an accessory
to the hand vacuum, slide it into the opening
in the nozzle. To remove, press the front latch
release button on the hand vac where it meets
the wand, and slide out the accessory.
ABOVE-FLOOR WITH WAND
To detach the floor nozzle from the wand,
step on the nozzle while pressing the
nozzle release button at the bottom of
the wand. Lift the wand to remove it. To
reattach the wand, align it over the neck
of the floor nozzle, then slide it on until it
clicks into place.
s h a r kc l e a n . c o . u k
15

Advertisement

loading
Need help?

Need help?

Do you have a question about the Clean & Empty PowerDetect and is the answer not in the manual?

This manual is also suitable for:

Ip3251ukt