Table of Contents
Advertisement
READ ATTRIBUTE
6.13. READ ATTRIBUTE 8Ch
The READ ATTRIBUTE command allows an application client to read attribute values from the Medium Auxiliary
memory (MAM).
Bit
7
Byte
0
1
Reserved (0)
2
3
4
5
6
7
8
(MSB)
9
10
(MSB)
11
12
13
14
15
If the medium auxiliary memory is not accessible because there is no medium present, the READ ATTRIBUTE
command shall be terminated with a CHECK CONDITION status. The sense key shall be set to NOT READY and
the additional sense code shall be set to MEDIUM NOT PRESENT.
If although medium is present, the Medium Auxiliary Memory is not accessible, the READ ATTRIBUTE command
shall be terminated with a CHECK CONDITION status. The sense key shall be set to MEDIUM ERROR and the
additional sense code shall be set to AUXILIARY MEMORY NOT ACCESSIBLE.
The service actions defined for the READ ATTRIBUTE command are shown in Table 6-63.
SONY AIT-3Ex drive SDX-800V series Ver.1.0
Table 6-63: READ ATTRIBUTE command
6
5
4
Operation Code (8Ch)
Volume Number
Partition Number
First Attribute ID
Allocation Length
3
2
Service Action
Reserved
Reserved
Reserved
Reserved
Reserved
Control
6.Command Specification
1
0
(LSB)
(LSB)
6-67
Advertisement
Table of Contents
