Table of Contents
Advertisement
Data transfer Rate
2.3.2.
2.3.2.1. Sustained Data Transfer Rate to and from the Tape
The sustained transfer rate to and from the tape is 18Mbyte per second with AIT-3Ex cassette, 16Mbyte per second
with AIT-3 and AIT-2 cassette, 11Mbyte per second with AIT-1 cassette. For this sustained rate to be achieved, the
drive must be streaming.
2.3.2.2. Burst Transfer Rate to and from the SCSI Bus
The SDX-800V will transmit and receive data bursts to and from the SCSI bus at a maximum burst rate of 12Mbyte
per second, using Ultra 160 asynchronous transfers and maximum of 160Mbyte per second, using Ultra160
synchronous transfers.
Initialize Time
2.3.3.
Initialize Time means the period from the time the drive is powered on to the time when the drive is ready and waiting
for a SCSI command such as INQUIRY or TEST UNIT READY. Initialize Time is less than 5 seconds.
The drive will respond with BUSY status until the completion of the Initialize Time. The Initialize Time does not
include the time necessary for drive diagnostics to complete and the drive to become ready for tape insertion.
2.3.4.
Load Time
Load Time means the period from the time when the operator inserts a cassette into the drive to the time when the
drive is ready. The data in the below table represents the average time for SDX-800V. The time it may take for
retrying is not reflected here.
SDX1-25C (170m)
Load Time
14 sec
2.3.5.
Unload Time
Unload Time means the period from the beginning of the unload sequence caused by Unload Command or Eject
button to the time when a cassette is ejected from the slot. Unload Time does not include Rewind time. The data in
the below table represents the average time for SDX-800V. The time it may take for retrying is not reflected here.
SDX1-25C (170m)
Unload Time
24 sec
Search Time
2.3.6.
Search Time means the period for the drive to find the position that is required by a command. This time also
depends on the tape length and the position of the head along the tape. The data in the below table represents the
average time for SDX-800V. The time it may take for retrying is not reflected here.
SDX-125C (170m)
Search Time
85 sec
Rewind Time
2.3.7.
Rewind Time means the period from the beginning to the end of rewinding sequence. This value depends on the
tape length and the position of the head along the tape. The data in the below table represents the average time for
SDX-800V. The time it may take for retrying is not reflected here.
SDX1-25C (170m)
Rewind Time
80 sec
SONY AIT-3Ex drive SDX-800V series Ver.1.0
SDX1-35C (230 m)
SDX2-50C (230 m)
14 sec
14 sec
SDX1-35C (230 m)
SDX2-50C (230 m)
24 sec
24 sec
SDX1-35C (230 m)
SDX2-50C (230 m)
120 sec
120 sec
SDX1-35C (230 m)
SDX2-50C (230 m)
105 sec
105 sec
2.Specification
SDX3-100C (230 m)
SDX3X-150C (246 m)
14 sec
14 sec
SDX3-100C (230 m)
SDX3X-150C (246 m)
24 sec
24 sec
SDX3-100C (230 m)
SDX3X-150C (246 m)
120 sec
130 sec
SDX3-100C (230 m)
SDX3X-150C (246 m)
105 sec
115 sec
2-7
Advertisement
Table of Contents
