Altitude; Suspended Particulate; Vibration; Shock - Sony AIT-SDX800 Product Specifications Manual

Altitude

2.2.2.
Operating
2.2.3.

Suspended Particulate

Operating

Vibration

2.2.4.
Operating
Non-operating

Shock

2.2.5.
Operating
Non-operating

Acoustic Noise

2.2.6.
The ambient noise level is no greater than 25 dB (A). The sound-meter on (A) scale is located 1m in front of the
center of the drive front panel. (A): A curve weight
Streaming Write/Read
Insert/Eject

EMC

2.2.7.
EMI/EMS Radiated Emissions /
Conducted noise
Emissions
EMS ESD
(Front Panel Only,
integrated product)

Orientation

2.2.8.
The SDX-800V can be installed in three different mounting positions as shown in the figure below. Each position has
a maximum tolerance of ± 10 degrees.
SONY AIT-3Ex drive SDX-800V series Ver.1.0
0 to 10,000 feet
Less than 150 microgram/m
Based Sampling period 24 hours
Swept Sine 5 to 500Hz, @0.25G Peak 1 Octave/min.
3 axis, 3 directions
Swept Sine 5 to 500Hz, @ 0.5G Peak 1 Octave/min.
3 axis, 3 directions
No Data Loss
Half Sine
Performance
5 G Peak 3 ms
3 axes, 3 directions
*Interval 10 seconds
No Device Damage
Half Sine
90 G Peak 3 ms
(30 G Peak 11 ms)
3 axes, 3 directions
* Interval 10 seconds
35dB(A)
60dB(A)
EN 55022 / 94 + EN 55022 A1 / 95 class B
Discharge Voltage
Less than 15kV: No operation failure
Less than 20kV: No drive damage
3
2.Specification
2-5