Icom IC-25A Instruction Manual page 30

00 ^ АТ (Up/Down)
This flow occurs when the frequency is moved up.
When the frequency is moved down, the
OO signal is not fed to АТ.
02 > AQ (Memory Channel 1)
This flow occurs when the VFO/MEMORY CHANNEL Switch is set at "1 и:
02 А1 мене, Сћаппе! 2)
This flow occurs when the МЕО/МЕМОВУ
CHANNEL Switch is set at "2".
02 > A2 (Memory Channel 3)
This flow occurs when the VFO/MEMORY
CHANNEL Switch is set at "3".
02 > A3 (Memory Channel 4)
This flow occurs when the VFO/MEMORY
CHANNEL
Switch is set at "4".
02 AO, A1 (Memory Channel 5) _
This flow occurs when the VFO/MEMORY
CHANNEL Switch is set at "5".
O3 > AO (VFO Select)
O3 > A1 (Memory Read)
This flow occurs when the VFO/MEMORY
CHANNEL
Switch is set at a memory channel,
and the set operates on the channel.
This function is prior to the function
04 > A2 (5KHz Steps)
O4 > АЗ (10K Hz Steps)
When
this flow occurs, the operating frequency
is moved
up or down with
10KHz steps.
(This mode is not used for IC-25A/E.)
04 > AO, A2 (15KHz Steps)
When
this flow occurs, the operating frequency is moved
up or down with
15KHz steps.
(This mode is used for VFO B of IC-25A.)
O4 > AO, АЗ (25KHz Steps)
When
this flow occurs, the operating frequency is moved
up or down with 25KHz steps.
(This mode is used for VFO B of IC-25E.)
O5 > AO (+Duplex)
(This mode is not used for IC-25E.)
—28-—