Moving The Quarantine Storage - F-SECURE ANTI-VIRUS FOR MICROSOFT EXCHANGE 7.10 Administrator's Manual

252
7.12

Moving the Quarantine Storage

When you want to change the Quarantine storage location either using
the F-Secure Policy Manager Console or F-Secure Anti-Virus for
Microsoft Exchange Web Console, note that the product does not create
the new directory automatically. Before you change the Quarantine
storage directory, make sure that the directory exists and it has proper
security permissions.
You can use the xcopy command to create and change the Quarantine
storage directory by copying the existing directory with the current
ownership and ACL information. In the following example, the Quarantine
storage is moved from C:\Program Files\F-Secure\Quarantine
Manager\quarantine to D:\Quarantine:
1. Stop F-Secure Quarantine Manager service to prevent any
quarantine operations while you move the location of the Quarantine
storage. Run the following command from the command prompt:
net stop "F-Secure Quarantine Manager"
2.
Run the following command from the command prompt to copy the
current content to the new location:
xcopy "C:\Program Files\F-Secure\Quarantine
Manager\quarantine" D:\Quarantine\ /O /X /E
Note the use of backslashes in the source and destination directory
paths.
3.
Change the path for FSMSEQS$ shared folder. If the product is
installed in the local quarantine management mode, you can skip this
step.