Interface - F-SECURE ANTI-VIRUS FOR MICROSOFT EXCHANGE 7.10 Administrator's Manual

122
5.4.1

Interface

Specify how the server will interact with clients.
IP Address
TCP Port
Accept Connections
Max Connections
Max Connections Per
Host
Send Content
Timeout
Receive Content
Timeout
Keep Alive Timeout
Specifies the service listen address in case of
multiple network interface cards or multiple IP
addresses. If you do not assign an IP address
(0.0.0.0), the server responds to all IP
addresses assigned to the host.
Specifies the TCP port that the server listens for
incoming requests. The default port number is
18971. If you change this port number, you must
modify the connection settings of the client
accordingly, so that the client sends requests to
the same port.
Specifies a comma-separated list of IP
addresses the server accepts incoming requests
from. If the list is empty, the server accepts
connections from any host.
Specifies the maximum number of simultaneous
connections the server can accept. Value zero
(0) means no limit.
Specifies the maximum number of simultaneous
connections the server can accept from a
particular host. Value zero (0) means no limit.
Specifies how long the server should wait before
it timeouts on sending data to the client.
Specifies how long the server should wait before
it timeouts when receiving data from the client.
Specifies the length of time before the server
closes an inactive/idle connection. This ensures
that all connections are closed if the protocol
fails to close a connection.