Install the Latest grandMA3 onPC Software and the Operating System
Warning:
Updating the grandMA3 onPC software and the operating system deletes all files previously stored.
Hint:
To update only the grandMA3 onPC software, use the network update process. For more information, see Network
update.
1. To install, download the latest software version from www.malighting.com.
The required installer is called grandMA3 onPC Windows Hardware Image x.x.x.x.
2. Save the full software image on your computer's hard drive.
3. Extract the zip file "grandMA3_v.x.x.x.x_windows_hardware_image.zip" and copy it onto a USB flash drive (FAT32 formatted,
minimum 8 GB).
4. Insert the USB flash drive.
5. Power up the grandMA3 onPC command wing XT.
6. If necessary, tap F8 to choose Boot device and select boot from USB.
7. Follow the onscreen instructions during the update process.
To learn more about the update process, read the Update grandMA3 onPC windows hardware topic in the online user manual.
Important:
To configure the device, or to update or downdate the installed software, use a grandMA3 console or your PC or laptop
with the grandMA3 onPC software installed. For more information see the topics Update the Software via Network
Update in the grandMA3 User Manual online available at www.malighting.com.
20
Intended Use
Safety
Support
Transport
Limitations
Quick Start
Maintenance
Disposal
Technical Data
Instances
Declaration of Conformity
Need help?
Do you have a question about the grandMA3 onPC command wing XT and is the answer not in the manual?