Related Manuals for HICFM FAN-D24DC
Summary of Contents for HICFM FAN-D24DC
- Page 1 24" INDUSTRIAL DC DRUM FAN ITEM NO : FAN-D24DC 120V / 60Hz, 1.91A READ & SAVE THESE INSTRUCTIONS Questions, problems, missing parts? Before returning the product, please e-mail our customer service by hicfm@outlook.com...
- Page 2 1. Read and save these instructions. Do not operate fan unless you have read these instructions. 2. Unplug the fan before moving it or performing maintenance. Do not touch the fan when your hands are wet. 3. Those who are not qualified electricians should not disassemble, repair or rebuild the fan.
- Page 3 1. Assembly the Wheels by inserting the Wheel Shafts into the Base Bracket. Wheel Shaft 2. Take the Split Pin through the hole of Wheel Shafts, and open it for secure the wheels location. Split Pin Split Pin...
- Page 4 1. Place the fan on a safe, flat surface where it can fall or be pulled by the cord. 2. Fan Speed Control: This switch turns on and off the power. If you want to shut the fan off at any time during operation, turn the switch to Power Off position and unplug the fan.
- Page 5 Some states do not allow the exclusion or limitation of the incidental or consequential damages, so the above exclusion or limitation may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Blades FAN-D24DC...
Need help?
Do you have a question about the FAN-D24DC and is the answer not in the manual?
Questions and answers