Download Print this page

Advertisement

Quick Links

Wirbelbock-Gewinde
> VWBG-V in pink<
Safety instructions
This safety instruction has to be kept on file for the
whole lifetime of the product and forwarded with the product.
TRANSLATION OF THE ORIGINAL SAFETY INSTRUCTION
RUD Ketten
Rieger & Dietz GmbH u. Co. KG
73432 Aalen
Tel. +49 7361 504-5438
sling@rud.com
www.rud.com
EG-Konformitätserklärung
entsprechend der EG-Maschinenrichtlinie 2006/42/EG, Anhang II A und ihren Änderungen
Hersteller:
RUD Ketten
Rieger & Dietz GmbH u. Co. KG
Friedensinsel
73432 Aalen
Hiermit erklären wir, dass die nachfolgend bezeichnete Maschine aufgrund ihrer Konzipie-
rung und Bauart, sowie in der von uns in Verkehr gebrachten Ausführung, den grundle-
genden Sicherheits- und Gesundheitsanforderungen der EG-Maschinenrichtlinie
2006/42/EG sowie den unten aufgeführten harmonisierten und nationalen Normen sowie
technischen Spezifikationen entspricht.
Bei einer nicht mit uns abgestimmten Änderung der Maschine verliert diese Erklärung ihre
Gültigkeit.
_____________________________________________
Wirbelbock
Produktbezeichnung:
_____________________________________________
VWBG-V / VWBG
Folgende harmonisierten Normen wurden angewandt:
_________________
DIN EN 1677-1 : 2009-03
_________________
DIN EN ISO 12100 : 2011-03
_________________
_________________
_________________
Folgende nationalen Normen und technische Spezifikationen wurden außerdem angewandt:
_________________
DGUV-R 109-017 : 2020-12
_________________
_________________
_________________
_________________
Für die Zusammenstellung der Konformitätsdokumentation bevollmächtigte Person:
Michael Betzler, RUD Ketten, 73432 Aalen
Hermann Kolb, Bereichsleitung MA
Aalen, den 15.04.2021
_____________________________________________
Name, Funktion und Unterschrift Verantwortlicher
_________________
DIN EN 1677-4 : 2009-03
_________________
_________________
_________________
_________________
_________________
_________________
_________________
_________________
_________________
> VWBG-V in pink<
Hoist ring for bolting
Vario (variable bolt lengths)
EC-Declaration of conformity
According to the EC-Machinery Directive 2006/42/EC, annex II A and amendments
RUD Ketten
Manufacturer:
Rieger & Dietz GmbH u. Co. KG
Friedensinsel
73432 Aalen
We hereby declare that the equipment sold by us because of its design and construction,
as mentioned below, corresponds to the appropriate, basic requirements of safety and
health of the corresponding EC-Machinery Directive 2006/42/EC as well as to the below
mentioned harmonized and national norms as well as technical specifications.
In case of any modification of the equipment, not being agreed upon with us, this declara-
tion becomes invalid.
_____________________________________________
Product name:
Load ring
_____________________________________________
VWBG-V / VWBG
The following harmonized norms were applied:
_________________
DIN EN 1677-1 : 2009-03
_________________
DIN EN ISO 12100 : 2011-03
_________________
_________________
_________________
The following national norms and technical specifications were applied:
_________________
DGUV-R 109-017 : 2020-12
_________________
_________________
_________________
_________________
Authorized person for the configuration of the declaration documents:
Michael Betzler, RUD Ketten, 73432 Aalen
Hermann Kolb, Bereichsleitung MA
Aalen, den 15.04.2021
_____________________________________________
Name, function and signature of the responsible person
EN
_________________
DIN EN 1677-4 : 2009-03
_________________
_________________
_________________
_________________
_________________
_________________
_________________
_________________
_________________
VWBG-V 1

Advertisement

loading
Need help?

Need help?

Do you have a question about the VWBG-V and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for RUD VWBG-V

  • Page 1 _________________ _________________ Authorized person for the configuration of the declaration documents: Für die Zusammenstellung der Konformitätsdokumentation bevollmächtigte Person: Michael Betzler, RUD Ketten, 73432 Aalen Michael Betzler, RUD Ketten, 73432 Aalen Hermann Kolb, Bereichsleitung MA Hermann Kolb, Bereichsleitung MA Aalen, den 15.04.2021 Aalen, den 15.04.2021...
  • Page 2: Safety Instructions

    • The position of the lifting points must be carried out in such a way lifting process. that unintended movement like turning or flipping will be avoided. • RUD VWBG-V lifting points must only be used by instructed and • For single leg lifts, the lifting point should be vertically competent persons considering DGUV 109-017 and outside above the centre of gravity of the load.
  • Page 3 Pic. 2: VWBG-V must have been fully bolted in and DIN EN 1677 for a dynamic load of 20,000 load cycles. • Thread of the VWBG-V must be completely engaged and the lifting • Keep in mind that several load cycles can occur with a point must be installed full-faced.
  • Page 4 • Complete, readable WLL statements as well as manufacturer sign. for the assembly. • Deformation at load bearing components like base body, • If the VWBG-V is to remain permanently attached to a load suspension ring and threaded pin. for regular turning and reversing, a suitable thread locking •...
  • Page 5 Plate thickness 50 mm, through hole for M 20 bolt, height of nut 20 mm, thickness of the washer 3 mm, plus bolt projection 5 mm (2x pitch). Order length: VWBG-V-2.0 M 20 x 78. Pic. 6: VWBG-V Pic. 7: VWBG-V (Vario)
  • Page 6 VWBG-V 2.0 M22 2 (2.5) 4 (5) 2.8 (3.5) 2 (2.5) 2 (2.5) 4.25 (5.25) 3 (3.75) 2 (2.5) VWBG-V 3.5 M24 / 1’’ 3.5 (4) 7 (8) 4.9 (5.6) 3.5 (4) 3.5 (4) 7.35 (8.4) 5.25 (6) 3.5 (4) VWBG-V 3.5 M27...

This manual is also suitable for:

Vwbg-v 0.3Vwbg-v 0.45Vwbg-v 0.6Vwbg-v 1.0Vwbg-v 1.3Vwbg-v 1.8 ... Show all