Advertisement
Quick Links
Hoist ring for bolting
> VWBG-V <
in pink
Safety instructions
This safety instruction/declaration has to be kept on file
for the whole lifetime of the product.
Translation of the original safety instruction
RUD Ketten
Rieger & Dietz GmbH u. Co. KG
73428 Aalen
Tel. +49 7361 504-1370
Fax +49 7361 504-1171
sling@rud.com
www.rud.com
EG-Konformitätserklärung
entsprechend der EG-Maschinenrichtlinie 2006/42/EG, Anhang II A und ihren Änderungen
RUD Ketten
Hersteller:
Rieger & Dietz GmbH u. Co. KG
Friedensinsel
73432 Aalen
Hiermit erklären wir, dass die nachfolgend bezeichnete Maschine aufgrund ihrer Konzipie-
rung und Bauart, sowie in der von uns in Verkehr gebrachten Ausführung, den grundle-
genden Sicherheits- und Gesundheitsanforderungen der EG-Maschinenrichtlinie
2006/42/EG sowie den unten aufgeführten harmonisierten und nationalen Normen sowie
technischen Spezifikationen entspricht.
Bei einer nicht mit uns abgestimmten Änderung der Maschine verliert diese Erklärung ihre
Gültigkeit.
_____________________________________________
Produktbezeichnung:
Wirbelbock
_____________________________________________
VWBG-V / VWBG
Folgende harmonisierten Normen wurden angewandt:
_________________
EN 12100 : 2011-03
_________________
EN 1677-4 : 2009-03
_________________
_________________
_________________
Folgende nationalen Normen und technische Spezifikationen wurden außerdem angewandt:
_________________
BGR 500, KAP2.8 : 2008-04
_________________
_________________
_________________
_________________
Für die Zusammenstellung der Konformitätsdokumentation bevollmächtigte Person:
Reinhard Smetz, RUD Ketten, 73432 Aalen
_____________________________________________
Dr.-Ing. Arne Kriegsmann,(Prokurist/QMB)
Aalen, den 27.06.2014
Name, Funktion und Unterschrift Verantwortlicher
_________________
EN 1677-1 : 2009-03
_________________
_________________
_________________
_________________
_________________
_________________
_________________
_________________
_________________
Hoist ring for bolting
Vario (variable bolt lengths)
VWBG-V
EC-Declaration of conformity
According to the EC-Machinery Directive 2006/42/EC, annex II A and amendments
RUD Ketten
Manufacturer:
Rieger & Dietz GmbH u. Co. KG
Friedensinsel
73432 Aalen
We hereby declare that the equipment sold by us because of its design and construction,
as mentioned below, corresponds to the appropriate, basic requirements of safety and
health of the corresponding EC-Machinery Directive 2006/42/EC as well as to the below
mentioned harmonized and national norms as well as technical specifications.
In case of any modification of the equipment, not being agreed upon with us, this declara-
tion becomes invalid.
Product name:
_____________________________________________
Load ring
_____________________________________________
VWBG-V / VWBG
The following harmonized norms were applied:
_________________
EN 12100 : 2011-03
_________________
EN 1677-4 : 2009-03
_________________
_________________
_________________
The following national norms and technical specifications were applied:
_________________
BGR 500, KAP2.8 : 2008-04
_________________
_________________
_________________
_________________
Authorized person for the configuration of the declaration documents:
Reinhard Smetz, RUD Ketten, 73432 Aalen
_____________________________________________
Dr.-Ing. Arne Kriegsmann,(Prokurist/QMB)
Aalen, den 27.06.2014
Name, function and signature of the responsible person
EN
_________________
EN 1677-1 : 2009-03
_________________
_________________
_________________
_________________
_________________
_________________
_________________
_________________
_________________
1
VWBG-V in pink
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for RUD VWBG-V
Summary of Contents for RUD VWBG-V
- Page 1 _________________ _________________ _________________ _________________ Für die Zusammenstellung der Konformitätsdokumentation bevollmächtigte Person: Authorized person for the configuration of the declaration documents: Reinhard Smetz, RUD Ketten, 73432 Aalen Reinhard Smetz, RUD Ketten, 73432 Aalen _____________________________________________ _____________________________________________ Dr.-Ing. Arne Kriegsmann,(Prokurist/QMB) Aalen, den 27.06.2014 Dr.-Ing.
-
Page 2: Safety Instructions
Make sure that you have un- of 150°C (acc. to DIN EN ISO 2320). derstood all subjected matters. • RUD VWBG-V lifting points must not be used with Non-observance can lead to serious per- aggressive chemicals such as acids, alkaline so- sonal injuries and material damage and lutions and their vapours. - Page 3 VWBG-V until the bearing surface has support by using a spanner acc. to DIN 895 If the VWBG-V is will be loaded only perpendicular resp. DIN 894, without using an extension. (in axial direction of the thread, see picture 3 - part...
-
Page 4: Inspection Criteria
• Solid bolt fixture - Inspection of bolting torque products f.e. Loctite (read manufacturer´s in- • The bearing surface of the VWBG-V must lay plane struction) or form closed bolt securing such as a and holohedral on the bolting area. - Page 5 Repair work must only be carried out by a competent RUD-VWBG-Vs are designed for a dynamical loading person at RUD or by a RUD trained and authorized of 20.000 load cycles at nominal working load. The service station, which has obtained the necessary BG recommends: At a high dynamic loading with high knowledge and skills.
- Page 6 ’’ - 11 UNC 1.3 (1.5) ’’ 7991093 VWBG-V 2.0 - ’’ - 10 UNC 2.0 (2.5) ’’ 7991094 VWBG-V 3.5 - 1’’ - 8 UNC 3.5 (4.0) 1’’ 7991095 VWBG-V 5.0 - 1 ’’ - 7 UNC 5.0 (6.0) ’’ 7991096...
Need help?
Do you have a question about the VWBG-V and is the answer not in the manual?
Questions and answers