Table of Contents
Advertisement
Quick Links
Load ring
with internal thread
> VWBM <
Safety instructions
This safety instruction/declaration has to be kept on file
for the whole lifetime of the product
and forwarded with the product.
TRANSLATION OF THE ORIGINAL SAFETY INSTRUCTION
RUD Ketten
Rieger & Dietz GmbH u. Co. KG
73428 Aalen
Tel. +49 7361 504-1370
Fax +49 7361 504-1460
sling@rud.com
www.rud.com
EG-Konformitätserklärung
entsprechend der EG-Maschinenrichtlinie 2006/42/EG, Anhang II A und ihren Änderungen
RUD Ketten
Hersteller:
Rieger & Dietz GmbH u. Co. KG
Friedensinsel
73432 Aalen
Hiermit erklären wir, dass die nachfolgend bezeichnete Maschine aufgrund ihrer Konzipie-
rung und Bauart, sowie in der von uns in Verkehr gebrachten Ausführung, den grundle-
genden Sicherheits- und Gesundheitsanforderungen der EG-Maschinenrichtlinie
2006/42/EG sowie den unten aufgeführten harmonisierten und nationalen Normen sowie
technischen Spezifikationen entspricht.
Bei einer nicht mit uns abgestimmten Änderung der Maschine verliert diese Erklärung ihre
Gültigkeit.
_____________________________________________
_____________________________________________
Produktbezeichnung:
Wirbelbock VWBM
Folgende harmonisierten Normen wurden angewandt:
_________________
DIN EN 1677-1 : 2009-03
_________________
DIN EN ISO 12100 : 2011-03
_________________
_________________
_________________
Folgende nationalen Normen und technische Spezifikationen wurden außerdem angewandt:
_________________
DGUV-R 109-017 : 2020-12
_________________
_________________
_________________
_________________
Für die Zusammenstellung der Konformitätsdokumentation bevollmächtigte Person:
Michael Betzler, RUD Ketten, 73432 Aalen
Hermann Kolb, Bereichsleitung MA
Aalen, den 14.04.2021
_____________________________________________
Name, Funktion und Unterschrift Verantwortlicher
_________________
DIN EN 1677-4 : 2009-03
_________________
_________________
_________________
_________________
_________________
_________________
_________________
_________________
_________________
VWBM
Load ring with internal thread
EC-Declaration of conformity
According to the EC-Machinery Directive 2006/42/EC, annex II A and amendments
RUD Ketten
Manufacturer:
Rieger & Dietz GmbH u. Co. KG
Friedensinsel
73432 Aalen
We hereby declare that the equipment sold by us because of its design and construction,
as mentioned below, corresponds to the appropriate, basic requirements of safety and
health of the corresponding EC-Machinery Directive 2006/42/EC as well as to the below
mentioned harmonized and national norms as well as technical specifications.
In case of any modification of the equipment, not being agreed upon with us, this declara-
tion becomes invalid.
Product name:
_____________________________________________
_____________________________________________
Load ring VWBM
The following harmonized norms were applied:
_________________
DIN EN 1677-1 : 2009-03
_________________
DIN EN ISO 12100 : 2011-03
_________________
_________________
_________________
The following national norms and technical specifications were applied:
_________________
DGUV-R 109-017 : 2020-12
_________________
_________________
_________________
_________________
Authorized person for the configuration of the declaration documents:
Michael Betzler, RUD Ketten, 73432 Aalen
Hermann Kolb, Bereichsleitung MA
Aalen, den 14.04.2021
_____________________________________________
Name, function and signature of the responsible person
EN
_________________
DIN EN 1677-4 : 2009-03
_________________
_________________
_________________
_________________
_________________
_________________
_________________
_________________
_________________
VWBM
1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for RUD VWBM
Summary of Contents for RUD VWBM
- Page 1 _________________ _________________ Authorized person for the configuration of the declaration documents: Für die Zusammenstellung der Konformitätsdokumentation bevollmächtigte Person: Michael Betzler, RUD Ketten, 73432 Aalen Michael Betzler, RUD Ketten, 73432 Aalen Hermann Kolb, Bereichsleitung MA Hermann Kolb, Bereichsleitung MA Aalen, den 14.04.2021 Aalen, den 14.04.2021...
-
Page 2: Table Of Contents
RUD VWBM can be rotated 90° to the Safety instructions bolt-in direction under nominal load capacity. Intended use • The RUD VWBM load rings have to be rotatable Assembly- and instruction manual by 360° when securely screwed in. General information ..........2 •... -
Page 3: Hints For The Assembly
• The material construction to which the lifting point will be attached should be of adequate strength to withstand forces during lifting without deformation. • Only insert the RUD VWBM with the correct th- reads, which must correspond at least to class of strength 10.9. -
Page 4: User Instructions
• When turning under 90° to the bolt-in axis (Pic. 9 the bearing surface has support by using a spanner Part X part Y) the load capacity per VWBM is limited acc. to DIN 895 resp. DIN 894, without using an to the nominal load capacity (WLL). -
Page 5: Rotating And Turning Of Loads
VWBM with a higher load capacity. • When turning under 90° to the bolt-in axis (Pic. 9 Part X and Y) the load capacity per VWBM is limited to the nominal load capacity (Table 3: Columns with angle of inclination 90°). -
Page 6: Test Criteria For The Regular Visual Inspection By The User
• Solid thread fixture - Inspection of bolting torque RUD ID-POINT RFID transponders with a uniquely ® • The bearing surface of the VWBM must lay plane allocated identification number are press-fitted as and holohedral on the bolting area. standard in defined RUD products. In addition, RUD •... -
Page 7: Tables
VWBM 1.8 t M20 7911439 Table 2: Dimensioning Subject to technical alterations HINT Size F is the internal thread length of the VWBM and is 1.25 x M. Lifting method Number of legs 3 / 4* 3 / 4* 3 / 4* Inclination angle <ß...
Need help?
Do you have a question about the VWBM and is the answer not in the manual?
Questions and answers