Advertisement
Quick Links
ICE-Load Ring for bolting
>ICE-LBG-SR<
SuperRotation
Safety instructions
This safety instruction/declaration of the manufacturer has to be
kept on file for the whole lifetime of the product.
Translation of the original instructions
RUD Ketten
Rieger & Dietz GmbH u. Co. KG
73428 Aalen
Tel. +49 7361 504-1370
Fax +49 7361 504-1171
sling@rud.com
www.rud.com
EG-Konformitätserklärung
entsprechend der EG-Maschinenrichtlinie 2006/42/EG, Anhang II A und ihren Änderungen
RUD Ketten
Hersteller:
Rieger & Dietz GmbH u. Co. KG
Friedensinsel
73432 Aalen
Hiermit erklären wir, dass die nachfolgend bezeichnete Maschine aufgrund ihrer Konzipie-
rung und Bauart, sowie in der von uns in Verkehr gebrachten Ausführung, den grundle-
genden Sicherheits- und Gesundheitsanforderungen der EG-Maschinenrichtlinie
2006/42/EG sowie den unten aufgeführten harmonisierten und nationalen Normen sowie
technischen Spezifikationen entspricht.
Bei einer nicht mit uns abgestimmten Änderung der Maschine verliert diese Erklärung ihre
Gültigkeit.
_____________________________________________
Produktbezeichnung:
Lastbock Super-Rotation
_____________________________________________
ICE-LBG-SR
Folgende harmonisierten Normen wurden angewandt:
_________________
DIN EN 1677-1 : 2009-03
_________________
_________________
_________________
_________________
Folgende nationalen Normen und technische Spezifikationen wurden außerdem angewandt:
_________________
BGR 500, KAP2.8 : 2008-04
_________________
_________________
_________________
_________________
Für die Zusammenstellung der Konformitätsdokumentation bevollmächtigte Person:
Michael Betzler, RUD Ketten, 73432 Aalen
_____________________________________________
Dr.-Ing. Arne Kriegsmann,(Prokurist/QMB)
Aalen, den 26.09.2016
Name, Funktion und Unterschrift Verantwortlicher
®
_________________
DIN EN ISO 12100 : 2011-03
_________________
_________________
_________________
_________________
_________________
_________________
_________________
_________________
_________________
Load Ring in ICE-Pink - for bolting
ICE-LBG-SR
EC-Declaration of conformity
According to the EC-Machinery Directive 2006/42/EC, annex II A and amendments
RUD Ketten
Manufacturer:
Rieger & Dietz GmbH u. Co. KG
Friedensinsel
73432 Aalen
We hereby declare that the equipment sold by us because of its design and construction,
as mentioned below, corresponds to the appropriate, basic requirements of safety and
health of the corresponding EC-Machinery Directive 2006/42/EC as well as to the below
mentioned harmonized and national norms as well as technical specifications.
In case of any modification of the equipment, not being agreed upon with us, this declara-
tion becomes invalid.
Product name:
_____________________________________________
Load ring Super-Rotation
_____________________________________________
ICE-LBG-SR
The following harmonized norms were applied:
_________________
DIN EN 1677-1 : 2009-03
_________________
_________________
_________________
_________________
The following national norms and technical specifications were applied:
_________________
BGR 500, KAP2.8 : 2008-04
_________________
_________________
_________________
_________________
Authorized person for the configuration of the declaration documents:
Michael Betzler, RUD Ketten, 73432 Aalen
_____________________________________________
Dr.-Ing. Arne Kriegsmann,(Prokurist/QMB)
Aalen, den 26.09.2016
Name, function and signature of the responsible person
EN
_________________
DIN EN ISO 12100 : 2011-03
_________________
_________________
_________________
_________________
_________________
_________________
_________________
_________________
_________________
ICE-LBG-SR
1
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for RUD SuperRotation ICE-LBG-SR
Summary of Contents for RUD SuperRotation ICE-LBG-SR
- Page 1 _________________ _________________ _________________ _________________ Für die Zusammenstellung der Konformitätsdokumentation bevollmächtigte Person: Authorized person for the configuration of the declaration documents: Michael Betzler, RUD Ketten, 73432 Aalen Michael Betzler, RUD Ketten, 73432 Aalen _____________________________________________ _____________________________________________ Dr.-Ing. Arne Kriegsmann,(Prokurist/QMB) Dr.-Ing. Arne Kriegsmann,(Prokurist/QMB) Aalen, den 26.09.2016...
-
Page 2: Safety Instructions
+300°C (572°F). In addition to that observe injuries of persons and damage of objects the reduction factor when load drops. • RUD-Lifting points must not be used under chemi- Please inspect all ICE-LBG-SR before cal influences such as acids, alkaline solutions and each use. - Page 3 • Symmetry of loading: 3.3.1 General information for the usage Determine the working load limit of each individual RUD lifting point for symmetrical and unsymme- • Always regularly observe the appearance of the trical loading according to the following physical whole lifting point (e.g.
- Page 4 • RUD components are designed according to DIN • A bending load of the suspension ring is not per- EN 818 and DIN EN 1677 for a dynamic load of mitted! 20,000 load cycles. • Keep in mind that several load cycles can occur with a lifting procedure •...
- Page 5 (refer to Pic. 7). 3.4 Dismantling / Assembling the RUD bolt HINT The dismantling / assembling and/or the exchange of the RUD bolt must only be executed by a competent person! 3.4.1 Dismantling the bolt of the ICE-LBG-SR M8-M30 1.
-
Page 6: Inspection / Repair
Inspection / repair • Comprehensiveness of the lifting point. • Comprehensive, legible load-bearing information 4.1 Hints for periodical inspections as well as the manufacturer‘s identification mark. • Deformations on load-bearing parts such as basic The operator must determine and specify the nature body, hanging or hooking in suspension ring and and scope of the required tests as well as the periods bolt... - Page 7 ICE-LBG-SR...
- Page 8 ICE-LBG-SR...
Need help?
Do you have a question about the SuperRotation ICE-LBG-SR and is the answer not in the manual?
Questions and answers