RUD VLBG Additonal Operating & Safety Instructions

Load ring in pink - for bolting

Hide thumbs

page of 8

/ 8
Bookmarks

Quick Links

Download this manual

Load Ring for bolting

>VLBG<

Safety instructions

This safety instruction/declaration of the manufacturer has to be

kept on file for the whole lifetime of the product.

Translation of the original instructions

RUD Ketten

Rieger & Dietz GmbH u. Co. KG

73428 Aalen

Tel. +49 7361 504-1370

Fax +49 7361 504-1460

sling@rud.com

www.rud.com

EG-Konformitätserklärung

entsprechend der EG-Maschinenrichtlinie 2006/42/EG, Anhang II A und ihren Änderungen

RUD Ketten

Hersteller:

Rieger & Dietz GmbH u. Co. KG

Friedensinsel

73432 Aalen

Hiermit erklären wir, dass die nachfolgend bezeichnete Maschine aufgrund ihrer Konzipie-

rung und Bauart, sowie in der von uns in Verkehr gebrachten Ausführung, den grundle-

genden Sicherheits- und Gesundheitsanforderungen der EG-Maschinenrichtlinie

2006/42/EG sowie den unten aufgeführten harmonisierten und nationalen Normen sowie

technischen Spezifikationen entspricht.

Bei einer nicht mit uns abgestimmten Änderung der Maschine verliert diese Erklärung ihre

Gültigkeit.

_____________________________________________

Produktbezeichnung:

Lastbock VLBG

Folgende harmonisierten Normen wurden angewandt:

_________________

DIN EN 1677-1 : 2009-03

_________________

Folgende nationalen Normen und technische Spezifikationen wurden außerdem angewandt:

_________________

BGR 500, KAP2.8 : 2008-04

_________________

Für die Zusammenstellung der Konformitätsdokumentation bevollmächtigte Person:

Michael Betzler, RUD Ketten, 73432 Aalen

_____________________________________________

Dr.-Ing. Arne Kriegsmann,(Prokurist/QMB)

Aalen, den 26.09.2016

Name, Funktion und Unterschrift Verantwortlicher

_________________

DIN EN ISO 12100 : 2011-03

_________________

Load Ring in pink - for bolting

EC-Declaration of conformity

According to the EC-Machinery Directive 2006/42/EC, annex II A and amendments

RUD Ketten

Manufacturer:

Rieger & Dietz GmbH u. Co. KG

Friedensinsel

73432 Aalen

We hereby declare that the equipment sold by us because of its design and construction,

as mentioned below, corresponds to the appropriate, basic requirements of safety and

health of the corresponding EC-Machinery Directive 2006/42/EC as well as to the below

mentioned harmonized and national norms as well as technical specifications.

In case of any modification of the equipment, not being agreed upon with us, this declara-

tion becomes invalid.

Product name:

_____________________________________________

Load ring VLBG

The following harmonized norms were applied:

_________________

DIN EN 1677-1 : 2009-03

_________________

The following national norms and technical specifications were applied:

_________________

BGR 500, KAP2.8 : 2008-04

_________________

Authorized person for the configuration of the declaration documents:

Michael Betzler, RUD Ketten, 73432 Aalen

_____________________________________________

Dr.-Ing. Arne Kriegsmann,(Prokurist/QMB)

Aalen, den 26.09.2016

Name, function and signature of the responsible person

VLBG

_________________

DIN EN ISO 12100 : 2011-03

_________________

VLBG

Need help?

Do you have a question about the VLBG and is the answer not in the manual?

Questions and answers

Summary of Contents for RUD VLBG

Page 1 _________________ _________________ _________________ _________________ Für die Zusammenstellung der Konformitätsdokumentation bevollmächtigte Person: Authorized person for the configuration of the declaration documents: Michael Betzler, RUD Ketten, 73432 Aalen Michael Betzler, RUD Ketten, 73432 Aalen _____________________________________________ Dr.-Ing. Arne Kriegsmann,(Prokurist/QMB) _____________________________________________ Aalen, den 26.09.2016 Dr.-Ing.
Page 2: Safety Instructions
VLBG. Make sure that you have com- • Effects of temperature: prehend all subjected matters. Due to the DIN/EN bolts that are used in the VLBG, Non observance can lead to serious per- the working load limit must be reduced accordingly: sonal injuries and material damage and eliminates warranty.
Page 3 2,5 x M in aluminium-magnesium alloys process) it is necessary to tighten the bolt with (M = diameter of RUD lifting point bolt, for ex. M 20) a torque (+/- 10 %) acc. to chart 3. • When lifting light metals, nonferrous heavy metals •...
Page 4 • Prevent damage being caused to the lifting means by loading at sharp edged. • Set the suspension ring of the VLBG in the direction of force before attaching the lifting means. Pic. 4: The lifting point must be completely screwed in.
Page 5 3.4.1 Dismantling the bolt of the touch the head oft he bolt. VLBG M8-M48 / 3/8“ - 2“ 1. Position VLBG with the thread end upwards at the bushing on the top of the bench vice without clamping the hexagon head of the bolt.
Page 6: Inspection / Repair
• Mechanical damage such as significant notches, parti cularly in areas subject to tensile stress. • Easy rotation of the VLBG must be ensured 4.3 Additional test criteria for the Pic. 9: VLBG in sectional view. The insertion competent person / repair worker chamfer is visible on top of the bushing •...
Page 7 Factor Type Thread WLL in metric tons, bolted and adjusted in the direction of pull VLBG 0.3 t 0.42 0.63 0.45 VLBG 0.63 t M 10 / 3/8“ 0.63 0.63 1.26 1.26 0.88 0.63 0.63 1.32 0.95 0.63 VLBG 1 t M 12 / 1/2“...
Page 8 Stand [mm] [mm] Standard Vario [mm] [mm] [mm] [mm] VLBG 0.3 t M8 0.3 0.3 40 105 30 Nm 8500821 8600280 VLBG 0.63 t M10 0.63 0.32 30 44 125 10 60 Nm 8500822 8600281 VLBG 1 t M12 0.33 32...

RUD VLBG Additonal Operating & Safety Instructions

Quick Links

Need help?

Questions and answers

Related Manuals for RUD VLBG

Summary of Contents for RUD VLBG

Page 2: Safety Instructions

Page 6: Inspection / Repair