Using Bluetooth™ Components - Yamaha RX-A3000 Owner's Manual

SOURCE RECEIVER
Using Bluetooth™ components
AV When pairing is complete, perform the following
1 2 3 4
procedure to achieve a wireless connection between this
5 6 7 V-AUX
unit and the Bluetooth component. When the wireless
AUDIO
1 2 3 4
connection is complete, Bluetooth components can be
PHONO MULTI USB NET
played back.
d
DOCK TUNER SIRIUS
[ A ]
Depending on Bluetooth components, a wireless
connection is established automatically or by
operating the Bluetooth components. In that case, it is
not necessary to carry out the following procedure.
p
OPTION
Press dDOCK
1
i
ENTER
pOPTION
Press
2
menu.
J
1 : "Disconnect" is displayed when a Bluetooth component has been
connected.
3
"Not found" is displayed when there is an error
connecting. Check that the following conditions have
been satisfied, and try to establish a wireless
connection again.
• Both this unit and the Bluetooth component are paired.
• The Bluetooth component is switched on.
to switch to the DOCK input.
• The Bluetooth component is within 32 ft. (10 m) of the
Bluetooth Wireless Audio Receiver.
to display the Option
4
5
To disconnect a wireless connection, repeat the same
steps, and in step 3, select "Disconnect."
iCursor B / C
Use to select "Connect" and
J1
press iENTER.
When wireless connection is complete
B T c o n n e c t e d
pOPTION
Press to exit the Option menu.
Operate the Bluetooth component for
playback.
PLAYBACK
Playing back tunes from Bluetooth™ components
VOLUME
99
En