Yamaha RX-A3000 Owner's Manual page 19

■
Using speakers in three rooms (Zone2 and Zone3 functions)
■ 7.1-channel speaker layout + Zone2 + Zone3
(7 speakers (in main zone) + subwoofer (in main zone) + front speakers (in
secondary and tertiary zones))
Main zone
Front R speaker
Subwoofer
Front L speaker
Center speaker
12 in (30 cm)
Surround L speaker
or more
J1
Surround back L speaker
In addition to the main room, speakers in other two rooms can also be controlled.
When the built-in amplifier assigned to speakers in another room is turned on, sound output
automatically switches from the surround back and/or surround speakers to the speakers in the other
rooms. J2, J3
J
1 : The sound of surround back channel can also be output from a single surround back speaker. When only one surround back
speaker is used, connect it to the SURROUND BACK L (SINGLE) jack and place it directly behind the listening position.
J
2 :
Sound cannot be output from the surround back speakers when it is output from the speakers connected to the EXTRA SP1
jacks.
J
3 : Sound cannot be output from the surround speakers when it is output from the speakers connected to the EXTRA SP2 jacks.
Zone2
Front R
speaker
Surround R
speaker
Front L speaker
Zone3
Front R
speaker
Surround back
R speaker
Front L speaker
■ Connections of speakers
FRONT jacks Front L/R speakers
CENTER jack Center speaker
SURROUND jacks Surround L/R speakers
SURROUND BACK jacks Surround back L/R
speakers
■ Assigning a speaker configuration
Power Amp Assign 7ch + 2ZONE
J
4 : EXTRA SP1 jacks can also be assigned to the Zone3 speakers with "Power Amp Assign"
J
5 : EXTRA SP2 jacks can also be assigned to the Zone2 speakers with "Power Amp Assign"
CONNECTIONS
Connecting speakers
SUBWOOFER Subwoofer
(PRE OUT) jack
J4
EXTRA SP1 jacks Zone2 speakers
J5
EXTRA SP2 jacks Zone3 speakers
(☞p. 116).
(☞p. 116).
19
En