Yamaha RX-A3000 Owner's Manual page 26

■
Using the external amplifier to output the
front and rear presence speaker channels
in main room and front speakers in
another room
■ 11.1-channel speaker layout
(7 speakers + subwoofer + external front and rear
presence speakers + front speakers (in secondary zone))
FPL EA FPR
C
L R
SW
SL SR
SBL SBR
RPL RPR
The presence speakers can be used for main room while the
J1 J2
front speakers are used for another room.
■ Connections of speakers
FRONT jacks Front L/R speakers
CENTER jack Center speaker
SURROUND jacks Surround L/R speakers
SURROUND BACK jacks Surround back L/R speakers
F.PRESENCE (PRE OUT) jacks External amplifier
(for front presence L/R speakers)
J3
SUBWOOFER (PRE OUT) jack Subwoofer
R.PRESENCE (ZONE OUT) jacks External amplifier
(for rear presence L/R speakers)
J4
EXTRA SP1 jacks Zone2 speakers
■ Assigning a speaker configuration
Power Amp Assign 7ch + FPR + RPR + 1ZONE
J
1 : Sound cannot be output from the surround back speakers when it is output from
the speakers connected to the EXTRA SP1 jacks.
J
2 :
The sound cannot be output for Zone3 in this condition.
J
3 : You can also use two subwoofers by connecting them to both SUBWOOFER1
(FRONT) and SUBWOOFER2 (REAR) jacks.
■
Using front speakers that support bi-amp
connection and front presence speakers
■ 7.1-channel speaker layout
(Front speaker (Bi-amp) + 3 speakers + subwoofer
+ external front presence speakers)
FPL
L R
A richer sound field can be created with the simultaneous use of
front speakers that support bi-amp connection and front
presence speakers.
■ Connections of speakers
FRONT jacks
CENTER jack
SURROUND jacks
SURROUND BACK jacks
F.PRESENCE (PRE OUT) jacks
SUBWOOFER (PRE OUT) jack
■ Assigning a speaker configuration
Power Amp Assign
J
4 : EXTRA SP1 jacks can also be assigned to Zone3 speakers with "Power Amp
Assign" (☞p. 116).
FPR
EA
BI-AMP BI-AMP
C
L R
SW
SL SR
Front L/R speakers (bi-amp)
Center speaker
Surround L/R speakers
Front L/R speakers (bi-amp)
External amplifier
(for front presence L/R speakers)
J3
Subwoofer
5ch BI-AMP + FPR
CONNECTIONS
Advanced speaker configuration
■
Using front speakers that support bi-amp
connection and surround back speakers
■ 7.1-channel speaker layout
(Front speaker (Bi-amp) + 3 speakers + subwoofer
+ external surround back speakers)
BI-AMP BI-AMP
C
L R
SL SR
SBL SBR
EA
Connecting surround back speakers to an external amplifier
enables simultaneous use of front speakers that support bi-amp
connection and surround back speakers.
■ Connections of speakers
FRONT jacks Front L/R speakers (bi-amp)
CENTER jack Center speaker
SURROUND jacks Surround L/R speakers
SURROUND BACK jacks Front L/R speakers (bi-amp)
SUR.BACK (PRE OUT) jacks External amplifier
(for surround back L/R speakers)
J3
SUBWOOFER (PRE OUT) jack Subwoofer
■ Assigning a speaker configuration
Power Amp Assign 5ch BI-AMP + SB
SW
26
En