Yamaha RX-A3000 Owner's Manual page 25

■
Using the presence speakers in the main
room and speakers in another room
■ 9.1-channel speaker layout
(7 speakers + subwoofer + external front presence
speakers + front speakers (in secondary zone))
FPL EA FPR
C
L R
SW
SL SR
SBL SBR
The presence speakers in the main room can be used while the
J1
front speakers in another room are used.
■ Connections of speakers
FRONT jacks Front L/R speakers
CENTER jack Center speaker
SURROUND jacks Surround L/R speakers
SURROUND BACK jacks Surround back L/R speakers
J2
EXTRA SP1 jacks Zone2 speakers
F.PRESENCE (PRE OUT) jacks External amplifier
(for front presence L/R speakers)
J3
SUBWOOFER (PRE OUT) jack Subwoofer
■ Assigning a speaker configuration
Power Amp Assign 7ch + FPR + 1ZONE
J
1 : Sound cannot be output from the surround back speakers when it is output from
the speakers connected to the EXTRA SP1 jacks.
J
2 :
EXTRA SP1 jacks can also be assigned to the Zone3 speakers with "Power
Amp Assign" (☞p. 116).
■
Using the external amplifier to output the
rear presence speaker channel
■ 9.1-channel speaker layout
(7 speakers + subwoofer + external rear presence
speakers)
FPL
L R
RPL
This unit automatically selects the front presence speakers or
surround back speakers to output sounds according to the
selected sound program.
The rear presence speaker channel cannot be output when the
front presence speaker channel is not output.
■ Connections of speakers
FRONT jacks
CENTER jack
SURROUND jacks
SURROUND BACK jacks
SUBWOOFER (PRE OUT) jack
R.PRESENCE (ZONE OUT) jacks
EXTRA SP1 jacks
■ Assigning a speaker configuration
Power Amp Assign
J
3 : You can also use two subwoofers by connecting them to both SUBWOOFER1
(FRONT) and SUBWOOFER2 (REAR) jacks.
J
4 :
The sound cannot be output for Zone3 in this condition.
FPR
C
L R
SW
SL SR
SBL SBR
RPR
EA
J1
J4
Front L/R speakers
Center speaker
Surround L/R speakers
Surround back L/R speakers
J3
Subwoofer
External amplifier
(for rear presence L/R speakers)
Front presence L/R speakers
7ch + RPR
CONNECTIONS
Advanced speaker configuration
■
Using the external amplifier to output the
front and rear presence speaker channels
■ 11.1-channel speaker layout
(7 speakers + subwoofer + front and rear presence
speakers)
FPL
EA
C
L R
SL SR
SBL SBR
RPL
The front and rear presence, surround back and surround
J4
speakers can be output at the same time.
■ Connections of speakers
FRONT jacks Front L/R speakers
CENTER jack Center speaker
SURROUND jacks Surround L/R speakers
SURROUND BACK jacks Surround back L/R speakers
F.PRESENCE (PRE OUT) jacks External amplifier
(for front presence L/R speakers)
J3
SUBWOOFER (PRE OUT) jack Subwoofer
R.PRESENCE (ZONE OUT) jacks External amplifier
(for rear presence L/R speakers)
■ Assigning a speaker configuration
Power Amp Assign 7ch + FPR + RPR
FPR
SW
RPR
25
En