VIVOTEK
Physical Description
Tilt Adjustment Screw
Built-in Microphone
PIR Sensor
Recessed Reset Button
Rotation Adjustment
Pan Adjustment
General I/O
Terminal Block
General I/O Terminal Block
This Network Camera provides a general I/O terminal block which is used to connect external
input / output devices. The pin definitions are described below.
4 - User's Manual
Lens
Screw
Screw
1 2 3 4
AV Out
Audio In
Audio/Video Out
Dome Cover
Pin
Name
1
Power +12V
2
Digital Output
3
Digital Input
4
Ground
Light Sensor
IR LEDs
SD/SDHC Card Slot
Status LED
Power Cord Socket
Ethernet 10/100 RJ45 Socket
Focus Controller
Zoom Controller
NTSC/PAL Switch
Int. NTSC
ON
1 2
Audio In
Ext PAL
External/Internal Microphone
Switch
Keep a note of the MAC address
before installing the camera�
Black Cover
Drill Holes
1 2 3 4
Network Camera
RoHS
C I
Model No: FD8161
MAC:0002D107258A
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions:
(1)This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
Made in Taiwan
Pat. 6,930,709