To Adjust The Zoom Factor And Focus Range - Vivotek FD8161 User Manual

VIVOTEK
The sophisticated 3-axis mechanism design offers very flexible, easy hardware installation for
either ceiling or wall mount�
DO NOT over rotate the lens� Doing
so will damage the camera lens
module

To adjust the zoom factor and focus range

1� Loosen the zoom controller to adjust the zoom factor� Upon completion, tighten the zoom
controller�
2� Loosen the focus controller to adjust the focus range� Upon completion, tighten the focus
controller�
In
PAL Ext
2 1
ON
NTSC Int.
Completion
1. Rotate the black cover inside the dome cover to fit the lens shooting direction.
2� Attach the dome cover to camera�
3� Secure the two dome screws with a screwdriver� Finally, make sure all parts of the camera are
securely installed�
12 - User's Manual
3-axis Mechanism Design
Rotate 350°
Audio Out AV
4 3 2 1
Loosen
Tighten
2
1
Pan 350°
Pan Adjustment Screw
Tilt Adjustment Screw
Tilt 85°
Rotation Adjustment Screw
3
The supplied screwdriver is exclusively
designed to match the dome screws� In case
you will need to adjust the lens later, do not
discard the screwdriver�
W
T
N