Vivotek FD8134V User Manual page 56

VIVOTEK
You can click Preview to fine-tune the image, or click Restore to recall the original settings without
incorporating the changes� When completed with the settings on this page, click Save to enable the
settings and click Close to exit the page.
If you want to configure another sensor setting for day/night/schedule mode, please click Profile to open
the Sensor Settings Profile Settings page as shown below.
2011/01/01 13:44:17
Please follow the steps below to setup a profile:
1� Check Enable this profile�
2� Select the applied mode: Day mode, Night mode, or schedule mode� Please manually enter a range of
time if you choose Schedule mode�
3. Configure Exposure settings in the second column. Please refer to the last page for detailed
information�
4� Click Save to enable the setting and click Close to exit the page.
56 - User's Manual