Vivotek FD8134V User Manual page 125

nmotionprofile
ptzenabled
eptz
npreset
protocol_https
protocol_rtsp
protocol_sip
protocol_maxconnecti
on
protocol_maxgenconn
ection
<positive integer> 0/7
<positive integer> 0/7
<positive integer> 0/7
<positive integer> 0/7
< boolean > 0/7
< boolean > 0/7
<boolean> 0/7
<positive integer> 0/7
<positive integer> 0/7
Number of motion profiles.
An 32-bit integer, each bit can be set
separately as follows:
Bit 0 => Support camera control function;
0(not support), 1(support)
Bit 1 => Built-in or external camera;
0(external), 1(built-in)
Bit 2 => Support pan operation, 0(not
support), 1(support)
Bit 3 => Support tilt operation; 0(not
support), 1(support)
Bit 4 => Support zoom operation;
0(not support), 1(support)
Bit 5 => Support focus operation;
0(not support), 1(support)
Bit 6 => Support iris operation;
0(not support), 1(support)
Bit 7 => External or built-in PT; 0(built-in),
1(external)
Bit 8 => Invalidate bit 1 ~ 7;
0(bit 1 ~ 7 are valid),
1(bit 1 ~ 7 are invalid)
Bit 9 => Reserved bit; Invalidate lens_pan,
Lens_tilt, lens_zoon, lens_focus, len_iris.
0(fields are valid),
1(fields are invalid)
A 32-bit integer, each bit can be set
separately as follows:
Bit 0 => stream 1 supports ePTZ or not.
Bit 1 => stream 2 supports ePTZ or not.
The rest may be deduced by analogy
Number of preset locations.
Indicate whether to support HTTP over SSL.
Indicate whether to support RTSP.
Indicate whether to support SIP.
The maximum allowed simultaneous
connections.
The maximum general streaming
connections .
VIVOTEK
User's Manual - 125