Installing and Removing the Batteries
Before you insert the batteries, thoroughly read "About Batteries" (
Before starting
When the AC adapter is connected to the camera, make sure that it is turned OFF.
Inserting the Batteries
Open the battery cover.
Insert the batteries in the correct orientation shown.
Close the battery cover.
Important • When batteries are loaded after camera operation has not ended properly, the camera
may not start up correctly. In this case, turn the power OFF, then back on again.
20
Unlock the battery cover lock q, and slide the battery
2
cover to open w.
1
Battery cover lock
Close and slide the battery cover q, and lock the
battery cover w.
1
Make sure that the cover is firmly closed.
2
Battery cover lock
page 13).