Table of Contents
Advertisement
Select the location to copy the images on the ACDSee
Device Detector screen, then mark "Launch ACDSee"
and then click "Download".
• When the camera is connected to the PC, the camera is displayed as an "untitled" disk
Memo
on the desktop.
• With the USB driver installed, simply reconnecting the USB cable causes the PC to
automatically identify this camera so that images can be transferred.
• To connect the USB cable smoothly and properly, pay attention to the shapes of the
connectors on the cable.
• When in connection with the PC, auto power OFF funciton does not operate.
• When another USB drive is used at the same time, the SD card in this camera may not
be mounted on the desktop. If this happens, connect only this camera to the PC.
Copying images is started.
To just copy images to the computer,
remove the mark from "Launch ACDSee"
then ACDSee does not start.
To delete an image from the camera's SD
card after copying the image, mark "Delete
images from device".
93
Hide quick links:
Advertisement
Table of Contents
