I Loading And Removing The Batteries; Battery Wear - Toshiba PDR-T10 Instruction Manual

Loading and Removing the Batteries
This camera uses two size AA batteries. Manganese batteries cannot be used.
Before loading the batteries, be sure to read "Notes on Batteries" on page 12.
Loading the Batteries
Important
1
1
1
Open the battery/SD card cover.
Slide the battery/SD card cover 1 , and open it 2 .
2
Load the batteries in the correct direction as shown in
the figure 2 above.
3
Close the battery/SD card cover.
Close the battery/SD card cover 1 , and slide it 2 .
Make sure that the battery cover is firmly closed.
Removing the Batteries
Important

Battery Wear

When the power is ON, the remaining battery power is displayed on the LCD monitor.
Display
Definition
Important
18
• When an AC adapter is connected, check that the power is OFF.
• If batteries are loaded when the termination is not operated correctly, the
camera may not start up properly. Turn on the power again to resume
operation.
2
2
• Before you remove the batteries, be sure to turn the camera OFF. If the
battery is removed with the power ON, it may cause malfunction and damage
important data.
Sufficient battery
power
• When you use the camera for the first time or if you have left the camera
without the battery loaded, set the date and time (➲ page 22).
Batteries Battery power
partially used nearing exhaustion
3
1
2
Batteries completely
exhausted