Erasing Images - Toshiba PDR-M500 Instruction Manual

Erasing Images

Erase images. Note, however, that protected images (
protected SD card (
Please note that the cleared images cannot be restored.
ERASE ONE IMAGE
Erase individual images one image at a time.
Turn the mode dial to one of [
If you selected [
erase with the
If you selected [
Press the
Select [
Select [YES] with the
This erases the image, and the camera returns to the mode selected on the mode dial.
To not erase, select [NO], and press the OK button.
If the message "Protected" appears on screen, remove the protection (
cancel the DPOF setting (
To continue erasing images, repeat steps from 2 to 5.
• Even if you take photographs after erasing an image, file are assigned serial numbers
Memo
from the next number from the very last number assigned after the image was erased.
• Images can also be erased in the thumbnail display. In the case of the thumbnail
display, the screen changes temporarily to the single image (frame) playback state.
After the image is erased, the screen returns to the thumbnail display.
82
page 15) cannot be erased.
], select the image you want to
button.
] [ ] [
erase button.
The [
MENU MENU
OK OK
] with the
The message "ERASE?" is displayed.
page 75).
page 76) or images on a write-
] [
], the last image will be erased.
] and the menu appears on screen.
button, and press the OK button.
button, and press the OK button.
] [ ] [ ].
page 77) or