Handling The Ac Adapter Correctly - Toshiba PDR-M500 Instruction Manual

Handling the AC Adapter Correctly

Be sure to use only the specified AC adapter (PDR AC20) (sold separately). Using a
different AC adapter might cause the camera to malfunction.
Before using the AC adapter, carefully read and strictly observe the Safety Precautions
( page 6) and the notes described below:
• Do not allow the connectors on the AC adapter to contact any other metal object because
this might cause a short circuit.
• To connect the AC adapter, fully insert the plug on the AC adapter into the DC IN 5V
terminal on the camera.
• When removing the AC adapter cable, turn the power OFF, then disconnect the cable while
holding its plug. Do not disconnect the cable by pulling the actual cable.
• Do not drop the AC adapter or subject it to strong impacts.
• Do not use the AC adapter in very hot and humid places.
• Do not insert the plug on the AC adapter while the batteries is being used. Turn the power
OFF first.
• The AC adapter is for indoor use only.
• The AC adapter may sometimes become warm during use. This does not designate
malfunction.
• Buzzing noises may come form inside the camera. This does not designate malfunction.
• Do not use the AC adapter near a radio because it could interfere with the radio.
• If you remove the batteries or AC adapter while the camera is in operation, the date may be
lost from the memory. If this happens, reset the date.
Specifications
AC adapter (PDR-AC20)
Input
Rated output
Operating temperature : 32°F (0°C) to +104°F (+40°C)
Storage temperature
Dimensions
Weight
Accessory
• Use the power supply indicated on the supplied AC cable. When using power supply
Memo
other than the displayed voltage in other countries/region, please purchase the AC
cable that applies to the standard of the country/region.
14
: 100 V to 240 V AC, 50/60 Hz
: 5 V DC, 3 A
: –4°F (–20°C) to +149°F (+65°C)
: 40.0 mm × 30.5 mm × 94.2 mm (W × H × D)
: Approx. 150 g
: Instruction Manual, AC cable