Enable Nvidia Sli - EVGA 680i - nForce LT SLI Motherboard User Manual

3. Install the NVIDIA SLI connector across the two outer graphics cards as
shown below. Each SLI-Ready graphics card has an SLI finger on the upper
side of the card.
Install NVIDIA SLI Software
Upon power up, the operating system recognizes the new NVIDIA SLI-Ready
components and displays the
Your motherboard shipped with a set of drivers that you must install. To check
for the latest drivers, go to
and download the latest SLI graphics drivers.
Once you have installed the NVIDIA SLI components and booted up your
system, do the following:
1. Install the nForce drivers (provided with the motherboard)
2. Reboot the system
3. Uninstall any old NVIDIA graphics drivers from the system and reboot the
computer. If there are no NVIDIA drivers installed, go to Step 4
4. Install the latest NVIDIA graphics drivers (provided with the add-in cards or
from the SLIZone Downloads Page)
5. Reboot the system.
70
Found New Hardware
http://www.slizone.com/content/slizone/drivers.html
Install the SLI connector
onto the two outer cards.
message.