EVGA 680i - nForce LT SLI Motherboard User Manual page 53

When you select one of the
is set to
Clock Mode Unlinked
is set to
Ready Memory Disable
FSB and Memory Clock Mode
Use the and
Page Up Page Down
Memory Clock Mode options. The options are:
Auto
This is the optimal setting since it sets the FSB and memory speeds
automatically.
Linked
When Link is selected,
the FSB speed can be entered manually. As the FSB speed is changed,
changes proportionally.
CPU Freq, MHz
CPU Freq, MHz
CPU Multiplier
FSB – Memory Clock Mode
FSB (QDR), MHz
Actual FSB (QDR), MHz
x MEM (DDR), MHz
Actual MEM (DDR), MHz
Unlinked
When Unlink is selected,
are changed to editable and the FSB and memory speeds can be entered
manually. As the FSB speed is changed,
proportionally.
FSB – Memory Clock Mode
FSB (QDR), MHz
Actual FSB (QDR), MHz
MEM (DDR), MHz
Actual MEM (DDR), MHz
FSB (QDR), MHz
Use the or keys to scroll through new values for the CPU FSB frequency
+ –
or type in a new value. Note that the
frequency that takes effect on a reboot.
MEM (DDR), MHz
Use the + or – keys to scroll through new values for the memory frequency
options, the
CPUOC x% FSB - Memory
and cannot be changed until
.
keys to scroll through the FSB and
is changed to editable and
FSB (QDR), MHz
2933.3 2933.3
11X 11X
[Linked]
[1067] 1066.7
1066.7
Auto 800.6
800.0
and
FSB (QDR), MHz
CPU Freq, MHz
[Linked]
[1067] 1066.7
1066.7
[1067] 800.6
800.0
Actual FSB (QDR)
Configuring the BIOS
SLI-
MEM (DDR), MHz
changes
reflects the actual
45