Language; Voice; Units; Time Settings - HP FA974AA - iPAQ 310 Travel Companion Product Manual

Language

The display language currently selected is displayed. By tapping the left or right arrow, you can scroll
through and select from the available languages. Your Travel Companion needs to be restarted if you
change this setting. You are prompted for confirmation before it restarts.

Voice

The voice guidance profile currently selected is displayed. By tapping the left or right arrow, you can
cycle through and select from the available languages and speakers.

Units

The unit of distance currently selected is displayed. By tapping the left or right arrow, you can cycle
through and select from the available distance units.

Time settings

To set timezone properties:
●
Use Auto Time Zone: You can select this option to configure your Travel Companion to
automatically determine the time zone based on the current GPS position. To select a time zone
manually, turn off the switch and tap Set Time Zone.
●
Auto Correction: You can select this option to configure your Travel Companion to frequently
check and correct the internal clock of the device with the always-accurate GPS time.

Set time format

You can set the date and time format displayed on the screen. Tap the left or right arrow to cycle through
and select from the various international formats that are available.

Warnings

Tap Warnings to enable and fine-tune user alerts. A new window opens with the options.

Warn when speeding

Maps might contain information about the speed limits of the road segments. You can configure your
Travel Companion to warn you when you exceed the current limit. This information is region-specific
and might not be available for your region (ask your local dealer) or might not be fully correct for all roads
in the map. Use this option to determine whether you need to receive the warnings or not.
You can set two different kinds of behavior for the warning: One is applied up to a certain speed limit
and another that is used at speeds limits above that.

Speeding tolerance

You can configure the warning to prompt you when you exceed the speed limit percentage specified
here.
Both positive and negative values can be given.

Alternative speed limit

If the speed limit of the current road segment equals or is above this limit, the speed warning uses the
Alternative speeding tolerance instead of the previous one.
Warnings 63