Aquaglide CYCLONE WHEEL Owner's Manual page 9

OPERATION
Cyclone Wheel is a floating play structure for use in water. Users coordinate to walk or run while inside the
item. Users may jump from the item into the water after making sure the area is clear of other users. This item
is intended to be used without anchor lines of any kind, but must be anchored when not in use. This item is
intended to be used with Cyclone Enclosure to contain it, or to be continually supervised by boat when in use.
PVC surfaces are more slippery when wet, which can lead to loss of balance when walking or climbing. Slid-
ing surfaces will work best when wetted first. Chemical treatments are available to reduce friction on sliding
surfaces, but are generally not necessary if products are kept clean.
Maintain working pressure: Air pressure depends on temperature. Always confirm proper working pres-
sure before and during use, as temperature changes may affect internal pressure. If the product shows signs
of instability or loss of pressure, discontinue use until the product returns to working pressure and/or repairs
are made.
Spread loads: Do not concentrate more than 300 lbs (136 kg) in one area during use.
Manage Winds/Thunderstorms: If strong winds (25 knots+) or thunderstorms are forecast, discontinue
use. Remove the product from the water and secure or store it.
Check connections: Check regularly to confirm that all connections are secure. Replace connecting straps
that show signs of wear.
Clean and maintain: Check regularly that the product is clean and that all handles and accessories work
properly. Each site requires its own cleaning/maintenance schedule, but regular cleaning and periodic main-
tenance is necessary to ensure the full life of the product. Replace handles or accessories that show signs of
wear.
Check moorings: Regularly check mooring lines and anchors, especially after extreme conditions. Replace
any item showing signs of permanent wear or stretching.
9
www.aquaglide.com