Page 1
Technical Support and E-Warranty Certificate www.vevor.com/support PRESSURE WASHER SURFACE CLEANER MODEL: DD15P We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and doses not necessarily mean to cover all categories of tools offered by us.
Page 2
This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if there are any technology or software updates on our product.
Warning-To reduce the risk of injury, user must read instructions manual carefully. INTRODUCTION Congratulations on the purchase of your new Rotary Surface Cleaner! You can be assured this Cleaner was constructed and designed with quality and performance in mind.Each component has been rigorously tested to ensure the high level of acceptance.
Page 4
Operation (Figure 2.) 1. Connect hose to the pressure washer and start pressure washer. 2. Walk slowly behind the cleaning forward. NOTE: It striping or swirling occurs, slow your pace. If striping or swirling continues, the surface cleaner skirt bristles may be worn and in need of replacement. NOTE: Always squeeze the gun's trigger to release any residual pressure immediately after use.
Page 5
CAUTION 1. High pressure in surface cleaner area. Risk of injury caused by improperly locked surface cleaner. Ensure you hear the "click" when inserting the surface cleaner tip into the quick connection. 2. Pull the surface cleaner to make sure it is seated properly before operating your unit.
Page 6
Technical Support and E-Warranty Certificate www.vevor.com/support...
Need help?
Do you have a question about the DD15P and is the answer not in the manual?
Questions and answers