Page 1
Technical Support and E-Warranty Certificate www.vevor.com/support HIGH PRESSURE CLEANER MODEL: HRH13P We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and doses not necessarily mean to cover all categories of tools offered by us.
Page 2
CustomerService@vevor.com This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if there are any technology or software updates on our product.
Warning-To reduce the risk of injury, user must read instructions manual carefully. INSTRUCTIONS Congratulations on the purchase of your POWER WASHER! Your POWER WASHER is a power tool in every sense of the word that may be used out-and inside your house. It is one of the finest most powerful household power washers on the market today.
Page 4
Never operate the power washer in bare feet, sandals, or open-toed shoes. When using the power washer near children make sure they are closely supervised by an adult to avoid injury. Never let a child use the power washer. When you press the power switch to turn off the power washer, water pressure may remain in the system.
Page 5
“on”. Running the pump dry will cause damage to the internal components. 22. Never use a water supply to your power washer that exceeds 150 psi maximum. 23. Keep fingers, hands, feet and any part of your body clear of the stream of high pressure water.
A double-insulated product is marked with the words “Double Insulation” or “Double Insulated”. Product may also be marked with symbol shown below. SAVE THESE INSTRUCTIONS TTECHNICAL DATA Model HRH13P Power 1800W Rated voltage 120V~ Frequency 60Hz...
Page 7
UNPACKING When unpacking this product, check to make sure parts listed below are included and carefully inspect for any damage that may have occurred during transit. If any part is missing and damaged, do not attempt to assemble or use the product. 1.
*The machine is always with handle to transport. PREPARATION OF OPERATION HOW TO SET UP YOUR UNIT Step 1 Mounting the wheel assembly A Install the wheels on the rear housing and press them down. B Install the accessories rack on the rear housing and fix four screws.(M4*16mm). - 7 -...
Page 9
Step 2 Mounting the handle and the hose hook A Slide the handle to the machine, and fix four screws(M4*22mm). B Install the hose hook on the long handle, and fix four screws(M4*16mm). Step 3 Mounting the gun hook and power cord holder On the left of the machine, slide the gun hook A on the upper of the handle and slide the gun hook B on the lower of the machine.
Page 10
Step 4 Attach the quick lance to gun Note: When the machine is not started, align the two projections on the lance with thegrooves on the gun when assembling. Insert the nozzle Grasp the top metal ring with your left hand and pull it downwards without releasing it.Insert the nozzle directly into the wand.
Page 11
without releasing the ring, continue pulling the nozzle out of the wand with force. Step 5 Screw the high pressure hose onto the water outlet pipe. Push and turn(clockwise) it tight to avoid leakage.When the pieces are joined properly, you cannot separate the two components by pulling straight out from the water outlet.
Page 12
Step 7 Attach the garden hose Connect one end of the home garden hose (not supplied) to the adapter and another end to water source. WARNING: The appliance is INTENDED to be used at a temperature above 0 degree. Step 8 Connect to the power supplier (1) Plug the pressure washer into the power outlet.
Page 13
OPERATING TO WASH WITH WATER Step 1 Turn on the water supply tap Connect the washer to the power supply and turn the switch to “ON/1” position. Then press trigger. Note: Before pressing trigger, make sure lock-off switch is in “unlock” position. Warning: Do not start the machine without connecting and turning on the water supply because it may cause damage to high pressure seals and reduce the service life of pump.
Page 14
install the quick connect nozzle onto spray gun quickly, loose the stop ring, and push back to original position. - Warning: High pressure jets can be dangerous if subject to misuse. The jet must not be directed at persons, live electrical equipment or the appliance itself. - Warning:Do not direct the jet against yourself or others in order to clean clothes or foot-wear.
to instructions on the container. connect nozzle to wand. b. Squeezel the wand trigger, detergent will come out through the nozzle. c. Apply detergent so it thoroughly covers cleaning surface. d. Allow detergent to remain on the surface for a few minutes. This is a good time to use a brush to lightly scrub heavily soiled areas.
should be cleaned periodically. Rinse it with clean tap water,and then place it back into the water inlet quick connector. 2. Using the nozzle tip cleaner provided ( or an unfold paper clip), insert the wire into the nozzle hole and move back and forth until debris is dislodged. Back flush water through the nozzles using garden hose and highest pressure available (either standard water nozzle or use your thumb over the nozzle to create water pressure for back flush ).
TROUBLESHOOTING AND FAQS Make sure the washing machine is in the "off" position. Plug the power cord into a grounded 120 volt outlet (extension cords should not be used). If the power cord does not plug into your outlet, your outlet is not properly grounded and should not be used.
Page 18
Why is water leaking Make sure there is an o-ring at the end of the metal tip of where the high pressure the high pressure hose. If no o-ring is present, the hose connects to the connection between the hose and spray gun will leak. spray gun? All lances and detergent tank are attached and removed from the spray gun in the same manner.
Page 20
Technical Support and E-Warranty Certificate www.vevor.com/support...
Need help?
Do you have a question about the HRH13P and is the answer not in the manual?
Questions and answers