Safety Information; Blasting Areas - LG VL600 Product Safety Information

Blasting Areas

To avoid interfering with blasting operations, turn your USB
Device OFF when in a "blasting area"or in areas posted: "Turn
off two-way radio". Obey all signs and instructions.
Potentially Explosive Atmosphere
Turn your USB Device OFF when in any area with a potentially
explosive atmosphere and obey all signs and instructions.
Areas with a potentially explosive atmosphere are often, but
not always marked clearly. Potential areas may include:
fueling areas (such as gasoline stations); below deck on boats;
fuel or chemical transfer or storage facilities; vehicles using
liquefied petroleum gas (such as propane or butane); areas
where the air contains chemicals or particles (such as grain,
dust, or metal powders); and any other area where you would
normally be advised to turn off your vehicle engine.
For Vehicles Equipped with an Air Bag
An air bag inflates with great force. DO NOT place objects,
including either installed or portable wireless equipment, in
the area over the air bag or in the air bag deployment area. If
in-vehicle wireless equipment is improperly installed and the
air bag inflates, serious injury could result.

Safety Information

Please read and observe the following information for safe
Caution
and proper use of your USB Device and to prevent damage.
Violation of the instructions may cause minor
or serious damage to the product.
G
Do not disassemble or open crush, bend or deform,
puncture or shred.
G
Do not modify or remanufacture, attempt to insert foreign
objects into the device, immerse or expose to water or
other liquids, expose to other hazard.
G
Only use the device for the system for which it is specified.
G
Promptly dispose of used devices in accordance with local
regulations.
G
Device usage by children should be supervised.
G
Avoid dropping the USB Device or exposing the USB
Device to a liquid. If the USB Device is dropped, especially
on a hard surface, or is exposed to a liquid or comes into
contact with a sharp object take it to a service center for
inspection.
G
At least, one of the Authentication methods may be
implemented. (e.g. H/W, S/W, Mechanical, Hologram,
etc.)
G
Improper use of the device may result in a other hazard.
11