Sharp TM200 Service Manual page 8

3. The communicating dialog box appears while processing.
4. When the restore is complete, click "OK".
TM200
4-4. DOWNLOADER
4-4-1. Introduction
Downloader allows you to upgrade the firmware.
1) System requirements
• Requirements for the upgrading tool:
OS : Windows 98, 98 SE, 2000, or XP
Download file : Only the Motorola format is supported.
Communication method : Asynchronous mode
Data length : 8 bits
Parity bit : None
Stop bit length : 1 bit
• Requirements for Loading loader
Handset : TM200
Communication method : Asynchronous mode
Data length : 8 bits
Parity bit : None
Stop bit length : 1 bit
2) Required devices
The following devices are required to rewrite MOT files using Communi-
cation Box.
Conversion connector (16-pin 3 10-pin)
This conversion connector is required to connect TM200 with Communica-
tion Box since the cable connector of Communication Box has 16 pins.
CONFIDENTIAL
TM200 1ADJUSTMENTS, PERFORMANCE CHECK, AND FIRMWARE UPGRADE
2 – 4
4-4-2. Getting started
This section describes how to install/uninstall the software and how to
connect handset to a PC.
1) Installing/uninstalling the software
[Installing the software]
Note: Downloader is installing/uninnstalling simultaneously with SPTP.
1. Double click the "setup.exe" icon in TM200 Install-E folder.
2. The Setup Wizard is activated.
Click the "Next" button.
TM200
TM200
3. A location to install the software appears.
To install in the default location, click the "Next" button.
To change the location, click the "Browse" button, select a desired
location and then click the "Next" button.
(See the description in "* Changing the install location" below.)
TM200
TM200
TM200
TM200