Download Print this page
Xylem Bell&Gossett e-80 Series Quick Start Manual
Xylem Bell&Gossett e-80 Series Quick Start Manual

Xylem Bell&Gossett e-80 Series Quick Start Manual

Advertisement

Quick Links

1 Introduction
NOTICE:
Read the installation, operation and maintenance
instructions located on the Xylem website before use.
Improper use of the product can cause personal injury
and damage to property and may void the warranty. See
e-80 Instruction Manual for complete Product Warranty.
WARNING:
Personal protective equipment should be worn when
handling this equipment. Only use properly sized certified
lifting equipment & lifting devices, including slings,
suitably rated for the weights to be lifted. Slings, when
used, must be of identical materials to avoid differences
in stretch rates. Do not use lifting devices that are frayed,
kinked, unmarked, or worn.
2 Pump lifting
Series e-80
For safety and correct product usage, read the
manual before this product is used.
WARNING:
Always lock out power to the driver before you
perform any installation of maintenance tasks.
Failure to disconnect and lock out driver power will
result in serious injury.
WARNING:
This product can expose you to chemicals including
Lead, which is known to the State of California to
cause cancer and birth defects or other
reproductive harm. For more information go to:
www.P65Warnings.ca.gov.
WARNING:
• Assembled units and their components are heavy. Failure to
properly lift and support this equipment can result in serious
physical injury and/or equipment damage. Lift equipment only
at the specifically identified lifting points. Lifting devices such
as eyebolts, slings, and spreaders must be rated, selected,
and used for the entire load being lifted.
• Crush hazard. The unit and the components can be heavy.
Use proper lifting methods and wear steel-toed shoes at all
times.
In order to lift the entire pump, use slings placed around the
unit as shown.
QUICKSTART GUIDE
P2005956 Rev A
THE MANUAL IS AVAILABLE AT:
https://qr.xylemsales.com/7xaj2m

Advertisement

loading
Need help?

Need help?

Do you have a question about the Bell&Gossett e-80 Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Xylem Bell&Gossett e-80 Series

  • Page 1 WARNING: Read the installation, operation and maintenance Always lock out power to the driver before you instructions located on the Xylem website before use. perform any installation of maintenance tasks. Improper use of the product can cause personal injury Failure to disconnect and lock out driver power will and damage to property and may void the warranty.
  • Page 2 Lock out power to the driver. Xylem Inc. Xylem and Bell & Gossett are registered trademarks of Xylem Inc. or one of its subsidiaries. 8200 N. Austin Avenue, Morton Grove, IL 60053 All other trademarks or registered trademarks are property of their respective owners.