Plan A Route - Nokia 002F581 User Manual

To move on the map, scroll up, down, left, or right with
the scroll key. The map is oriented towards north by
default.
To zoom in and out on the map, press the function key and
*, or the function key and #.
When you browse the map on the display, a new map is
automatically downloaded if you scroll to an area which
is not covered by maps already downloaded. These maps
are free of charge, but downloading may involve the
transmission of large amounts of data through your
service provider's network. For more information on data
transmission charges, contact your service provider. The
maps are automatically saved in the device memory or on
a compatible memory card (if inserted).
Display indicators
The GPS indicator
of the display shows the availability and strength of the
satellite signal. One bar is one satellite. When the device
tries to find a satellite, the bar is yellow. When the device
receives enough data from the satellite to establish a GPS
connection, the bar turns green. The more green bars, the
stronger the GPS connection.
Initially, your device must receive signals from at least four
satellites to calculate the coordinates of your location.
After the initial calculation, signals from three satellites
may be enough.
The data transfer indicator
internet connection used and the amount of data
transferred since the application started.
66
on the bottom right corner
shows the
Find locations
To find a location in the city or area displayed on the map,
enter the full or partial address of the location in the search
field, and press the scroll key. To find a location in another
city, enter the city and the full or partial address, such as
London Oxford Street, and press the scroll key.
To find a specific address, or an address in another country,
select Options Search
>
* and City or post code
Tip: To search for locations in another country using
the search field, enter also the name of the country
in the search field: Rome Italy.
To import a location address from the Contacts
application, select Options
Options Select from
>
The search results are grouped by categories. To limit the
search to one category, select
If you search for locations without an internet connection,
the search results are limited to a radius of 50 km (31
miles).

Plan a route

To plan a route, select your start point on the map or
search for a location, press the scroll key, and select
to route.
To define the destination and add more locations for your
route, select Options
>
the location.
To switch between walking or driving mode, select
Options Settings
> >
> Addresses. Country/Region
are mandatory.
Search Addresses
> >
Contacts.
Options > Search.
Add route point, and search for
Transport mode
>
Add