Table of Contents
Advertisement
4. Close the cover.
Eject the memory card
Important: Do not remove the memory card during
an operation when the card is being accessed. Doing so
may damage the memory card and the device, and corrupt
data stored on the card.
1. Press the power key briefly, and select
memory
card.
2. Open the cover of the memory card slot.
3. Press the end of the memory card to release it from the
memory card slot.
4. Close the cover.
Connect the headset
Warning: When you use the headset, your ability to
hear outside sounds may be affected. Do not use the
headset where it can endanger your safety.
Connect the compatible headset to the headset connector
of your device.
14
Attach the wrist strap
Thread the wrist strap as shown, and
tighten it.
Antennas
Remove
Your device may have internal and external antennas.
Avoid touching the antenna area unnecessarily while the
antenna is transmitting or receiving. Contact with
antennas affects the communication quality and may
cause a higher power level during operation and may
reduce the battery life.
Advertisement
Table of Contents
