Telephone Settings - Nokia 002F581 User Manual

Device and SIM card security
To change the PIN code, select
PIN code. The new code must be 4 to 8 digits long. The
PIN code protects your SIM card against unauthorised use
and is provided with the SIM card. After three consecutive
incorrect PIN code entries, the code is blocked, and you
need to use the PUK code to unblock it before you can use
the SIM card again.
To set the keypad to lock automatically after a defined
period, select Phone and SIM card
period.
To set a time-out after which the device is automatically
locked and can be used only if the correct lock code is
entered, select Phone and SIM card
period. Enter a number for the time-out in minutes, or
select None to set off the autolock period. When the device
is locked, you can still answer incoming calls, and calls may
still be possible to the official emergency number
programmed into your device.
To set a new lock code, select
code. The preset lock code is 12345. Enter the current code
and then the new code twice. The new code can be 4-255
characters long. Both alphabets and digits can be used,
and both uppercase and lowercase alphabets are possible.
The device notifies you if the lock code is not properly
formatted.
Restore original settings
To restore the original device settings, select
settings. To do this, you need your device lock code. After
resetting, the device may take a longer time to power on.
Phone and SIM card
Keypad autolock
>
Phone autolock
>
Phone and SIM card Lock
>
Factory
Documents, contact information, calendar entries, and
files are unaffected.
>

Telephone settings

Select Menu Tools
>
Select from the following:
Call — Define general call settings.
•
Call divert — Define your call divert settings.
•
divert", p. 34.
Call barring — Define your call barring settings.
•
"Call barring", p. 35.
Network — Adjust the network settings.
•
Call settings
To display your phone number to the person you are
calling, select Call
network determine whether your caller ID is sent, select
Set by network.
To display your net call address to the person you are
calling using a net call, select
call ID > Yes.
To be notified of a new incoming call while you have a call
in progress, select
Activate. To check if the function is active on the network,
select Options
>
To select whether net calls alert or not, select
Internet call alert. You are notified of missed net calls
with a notification.
Settings > Phone.
>
Send my caller ID > Yes. To let the
>
Call Send my internet
>
Call Call waiting Options
> >
Check status.
See "Call
See
>
Call
>
115