Table of Contents
Advertisement
Get started
After you have set up your device, switch it on and start to
explore what is new in Eseries.
First start-up
1. Press and hold the power key until you
feel the device vibrate.
2. If prompted, enter the PIN code or lock
code, and select OK.
3. When prompted, enter the country in
which you are located and the current
date and time. To find your country, enter
the first letters of the country name. It is
important to select the correct country,
because scheduled calendar entries may
change if you change the country later
and the new country is located on a
different time zone.
4. The Welcome application opens. Select from the
various options, or select
To configure the various settings in your device, use the
wizards available on the home screen and the Settings
wizard application. When you switch the device on, it may
recognise the SIM card provider and configure some
settings automatically. You can also contact your service
provider for the correct settings.
Exit
to close the application.
You can switch the device on without inserting a SIM card.
The device starts up in the offline mode, and you cannot
use the network-dependent phone functions.
To switch the device off, press and hold the power key.
Welcome
When you switch on your device for the first time, the
Welcome application opens. Select from the following:
Tutorial
provides information about your device and
•
shows you how to use it.
Switch
enables you to transfer content, such as
•
contacts and calendar entries, from a compatible Nokia
device.
See "Transfer content between
devices", p. 17.
E-mail settings
helps you configure e-mail settings.
•
Sett. wizard
helps you configure various settings.
•
"Settings wizard", p. 16.
To open the Welcome application later, select
Help
> Welcome.
The available options may vary.
See
Menu
>
15
Advertisement
Table of Contents
