Get Started; Insert A Sim Card And Battery - Nokia RM-425 User Manual

RM-425_FCC.fm Page 9 Friday, February 29, 2008 5:20 PM
Nokia may produce software updates that may offer new features, enhanced functions, or
improved performance. You may be able to request these updates through the Nokia
Software Updater PC application. To update the device software, you need the Nokia
Software Updater application and a compatible PC with Microsoft Windows 2000 or XP
operating system, broadband internet access, and a compatible data cable to connect your
device to the PC.
To get more information and to download the Nokia Software Updater application, visit
www.nokia.com/softwareupdate or your local Nokia website.
If software updates over the air are supported by your network, you may also be able to
request updates through the device. See "Update software", p. 47.
Downloading software updates may involve the transmission of large amounts of data
through your service provider's network. Contact your service provider for information about
data transmission charges.
Make sure that the device battery has enough power, or connect the charger before starting
the update.

1. Get started

■ Insert a SIM card and battery

Always switch the device off and disconnect the charger before removing the battery.
This phone uses a BL-5B battery.
For availability and information on using SIM card services, contact your SIM card vendor.
This may be the service provider or other vendor.
1. With the back of the phone facing you, slide the back cover to remove it (1 and
2). To remove the battery, lift it as shown (3).
9