Table of Contents
Advertisement
To set the image as a call image for a contact, select
Options
Set as contact call img.
>
contact.
To return to the viewfinder to capture a new image,
press the capture key.
Flash
The flash is available only in the main camera.
Keep a safe distance when using the flash. Do not
use the flash on people or animals at close range.
Do not cover the flash while taking a picture.
The camera of your device has an LED flash for low
light conditions. The following flash modes are
available for the still image camera:
( ),
R. eye redu.
( ),
On
To change the flash mode, in the active toolbar,
select the desired flash mode.
Scenes
Scenes are only available in the main camera.
A scene helps you to find the right colour and
lighting settings for the current environment. The
settings of each scene have been set according to a
certain style or environment.
The default scene in the image mode is Auto, and
in the video mode
Automatic
).
Assign to
>
Automatic
( ), and
Off
( ).
(both indicated with
To change the scene, in the active toolbar, select
Scene modes
and a scene.
To make your own scene suitable for a certain
environment, scroll to
User
Options
> Change. In the user defined scene you
can adjust different lighting and colour settings. To
copy the settings of another scene, select
scene mode
and the desired scene. To save the
changes and return to the scenes list, press Back.
To activate your own scene, scroll to
defined, press the scroll key, and select Select.
Take pictures in a sequence
The sequence mode is available only in the main
camera.
To set the camera to take six pictures or the desired
number of pictures in sequence (if enough memory
is available), in the active toolbar, select
mode.
To take six pictures, select Burst. To capture the
pictures, press the capture key.
To take two or more pictures in a sequence, select
the desired time interval. To capture pictures using
the selected time interval, press the capture key. To
stop taking pictures, select Cancel. The number of
pictures taken depends on the available memory.
After you take the pictures in the burst mode, they
are shown in a grid on the display. To view a picture,
defined, and select
Based on
User
Sequence
67
Advertisement
Table of Contents
