Specifications; Intended Use - Makita DBN501 Instruction Manual

ENGLISH (Original instructions)

SPECIFICATIONS

Model:
Nail size
Magazine capacity
*1 *2
Dimensions (L x W x H)
Rated voltage
Net weight
*1
without hook
*2
with BL1820B
NOTE: Nails are referred to as "fasteners" in this instruction manual unless otherwise specified.
• Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
• Specifications may differ from country to country.
• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-
est combination are shown in the table.
Applicable battery cartridge and charger
Battery cartridge
Charger
• Some of the battery cartridges and chargers listed above may not be available depending on your region of
residence.
WARNING:
Only use the battery cartridges and chargers listed above. Use of any other battery cartridges
and chargers may cause injury and/or fire.
Symbols
The followings show the symbols which may be used
for the equipment. Be sure that you understand their
meaning before use.
Read instruction manual.
Wear eye protection.
Wear ear protection.
Do not use on scaffoldings, ladders.
Keep fingers away from trigger when not
driving fasteners to avoid accidental firing.
DBN501
18 Ga x 15 / 20 / 25 / 30 / 32 / 35 / 38 / 40 / 45 / 50 mm
110 pcs.
246 mm x 96 mm x 301 mm
D.C. 18 V
2.7 - 3.0 kg
BL1815N / BL1820B / BL1830B / BL1840B / BL1850B / BL1860B
DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF /
Ni-MH
Li-ion

Intended use

This tool is intended for fastening on interior work and
furniture work.
7 ENGLISH
DC18SH / DC18WC
Only for EU countries
Due to the presence of hazardous com-
ponents in the equipment, waste electrical
and electronic equipment, accumulators
and batteries may have a negative impact
on the environment and human health.
Do not dispose of electrical and electronic
appliances or batteries with household
waste!
In accordance with the European Directive
on waste electrical and electronic equip-
ment and on accumulators and batteries
and waste accumulators and batteries,
as well as their adaptation to national law,
waste electrical equipment, batteries and
accumulators should be stored separately
and delivered to a separate collection point
for municipal waste, operating in accor-
dance with the regulations on environmen-
tal protection.
This is indicated by the symbol of the
crossed-out wheeled bin placed on the
equipment.