Summary of Contents for Lattice Semiconductor CertusPro-NX Versa Board
Page 1
CertusPro-NX Versa Board Evaluation Board User Guide FPGA-EB-02053-1.2 July 2023...
Page 2
The information provided in this document is proprietary to Lattice Semiconductor, and Lattice reserves the right to make any changes to the information in this document or to any products at any time without notice.
Figure 3.1. Configuration Architecture 3.1. JTAG Download Interface The CertusPro-NX Versa Board has a built-in download controller for programming the CertusPro-NX device. It uses an FT2232H Future Technology Devices International (FTDI) part to convert USB to JTAG. To use the built-in download cable, connect the USB cable from a PC with Radiant Programmer tool installed to the mini USB connector on the board.
Need help?
Do you have a question about the CertusPro-NX Versa Board and is the answer not in the manual?
Questions and answers