SodaStream E-DUO Manual

GET TO KNOW YOUR E-DUO™

ELECTRIC POWER CONNECT

PREFER A HOW-TO VIDEO?
SIMPLY SCAN AND WATCH

1. Connect the pronged plug that fits your local outlet to the power adapter.
   
2. Check the power cord placement at the base of the machine.
   
3. Look for the plug in icon to insert the plug.
   
4. Make sure that the power cord is threaded through the slot.
   

QUICK CONNECT CO₂ CYLINDER

1. Remove the seal and pull off the cap.
   
2. Pull open the back cover.
   
3. Raise the handle and insert the cylinder*, bottom first.
   
4. Lower the handle for a quick connect.
   
5. Replace the back cover.
   
6. Insert the adapter into a power outlet. The lights will turn on for 7 seconds.
   

*Make sure the glass carafe/BPA free carbonating bottle is not installed in the Sparkling Water Maker before inserting the cylinder.

BOTTLE INSERT

1. Fill the Glass Carafe/BPA Free bottle with cold water up to the fill line.
   
   Always fizz water before adding any flavor.
2. To unlock, turn the lever to the right and the carbonating head will lift automatically.
   
3. Insert the Glass Carafe/BPA Free carbonating bottle into the bottle holder.
   
4. Return the bottle holder to the upright position.
   
5. Push the carbonating head down and hold.
   
6. Turn the lever to the left until it reaches the locked position mark.
   

FIZZING

1. Simply press on the carbonating button according to your desired level of fizz.
   The lights have stopped flashing? Your sparkly drink is ready!
   
2. To unlock turn the lever to the right and the carbonating head will lift automatically.
   

Pressing any button during carbonation will stop the carbonation process.

CLEANING & MAINTENANCE

1. To clean the flask, open and tilt towards you.
   
2. Unlock the plastic bottle holder by twisting counter-clockwise and remove it.
   
3. Use a cleaning cloth to wipe the inside and outside.
   
4. Return plastic bottle holder and twist clockwise to lock into place.
   

Never use abrasive cleaners or sharp tools to clean. If needed, use a mild liquid dish soap and a damp cloth to gently clean.

SET UP

SODASTREAM^® CO₂ QUICK CONNECT CYLINDER

Please note that the SodaStream^® E-DUO^TM is only compatible with the CO₂ Quick Connect Cylinder and is NOT compatible with the SodaStream^® CO₂ Screw System Cylinder or other cylinders.

CONNECTING THE POWER ADAPTER

Connect the pronged plug that fits your local outlet to the power adapter. Check the power cord placement at the base of the machine. Look for the plug-in icon to insert the plug. Make sure that the power cord is threaded through the slot.

INSTALLING THE CO₂ QUICK CONNECT CYLINDER

1. Place the SodaStream^® E-DUO^TM Sparkling Water Maker on a flat sturdy surface in an upright position. Turn the carbonating flask lever to the right to the unlocked position. The carbonating head will rise automatically.
2. The carbonating flask will open. Pull the carbonating flask gently forward and remove the SodaStream^® glass carbonating carafe/Plastic Carbonating Bottle if it is installed in the SodaStream^® E-DUO^TM Sparkling Water Maker.
   
   Never insert or replace the CO₂ Quick Connect cylinder while the glass carbonating carafe or Plastic Carbonating Bottle is installed in the E-DUO^TM Sparkling Water Maker. This can cause the glass carbonating carafe or Plastic Carbonating Bottle to burst.
   
3. Return the carbonating flask to the upright position, push and hold the carbonating head down and turn the carbonating flask lever left until it clicks into the locked position.
   
4. Gently pull the back cover away from the E-DUO^TM Sparkling Water Maker to remove.
   
5. Remove seal and cap from the SodaStream CO₂ Quick Connect Cylinder.
   
6. Raise the pink cylinder handle. Insert the CO₂ Quick Connect Cylinder in the back of the E-DUO TM Sparkling Water Maker.
   
   Never use the SodaStream CO₂ Quick Connect Cylinder if it appears to be damaged.
   
7. Lower the Pink Cylinder Handle.
   
8. Reinstall the back cover. Now you are ready to create the bubbles.
   
9. Insert the plug into the wall outlet. The buttons will light up. Only use an original SodaStream power adapter.

CREATE THE BUBBLES

COMPATIBLE WITH THE FOLLOWING ONLY:

Check for compatibility on the Bottle pack.

1. Fill the SodaStream Glass Carbonating Carafe/Plastic Carbonating Bottle with cold drinking water up to the fill line.
   
   Do not carbonate anything other than water. Other liquids can contaminate and clog internal parts, potentially resulting in excessive pressure, bottle failure during carbonation and serious injury. Never carbonate after flavoring has been added.
   
2. Place the SodaStream^® E-DUO^TM Sparkling Water Maker on a flat sturdy surface in an upright position. Turn the carbonating flask lever to the right to the unlocked position. The carbonating head will rise automatically.
   
   Never use an E-DUO^TM Sparkling Water Maker with a broken carbonating tube. This can cause excessive pressure, carafe/bottle failure and serious injury.
   Tilt the carbonating flask forward and insert the Glass Carbonating Carafe/Plastic Carbonating Bottle into the carbonating flask. Return the SodaStream carbonating flask to the upright position.
   
3. Push the carbonating head down and hold. Turn the carbonating flask lever left, to the locked position.
   
4. To carbonate, press one of the three buttons to achieve your desired carbonation level:
   
   • Left button (one bubble) for light fizz.
   • Middle button (two bubbles) for medium fizz.
   • Right button (three bubbles) for high fizz. When carbonating you may hear the release of gas which is the normal sound of pressure being released. Pressing any button during carbonation will stop the carbonation process.
5. When the desired level of carbonation is achieved, please wait 3 seconds and turn the carbonating flask lever to the right to the unlocked position until the carbonating head starts to rise. As you start to turn to the unlock position you will hear the excess gas being safely released from the Glass Carbonating Carafe/Plastic Carbonating Bottle.
   
6. Tilt the SodaStream carbonating flask forward and remove the Glass Carbonating Carafe/Plastic Carbonating Bottle from the SodaStream^® E-DUO^TM Sparkling Water Maker.
   
7. Pour and enjoy a fresh sparkling drink!

Note: You may see small pieces of ice appear in the water during carbonation of very cold water. Any ice created will simply melt.

CARE

E-DUO^TM SPARKLING WATER MAKER CARE

• Never use abrasive cleaners or sharp tools to clean. If needed, use a mild liquid dish soap and a soft damp cloth to gently clean.
• Wipe spills to keep base dry.
• Do not place in water or wash in a dishwasher, doing so will seriously damage your Sparkling Water Maker.

GLASS CARBONATING CARAFE CARE

• The SodaStream^® Glass Carbonating Carafe may be cleaned in a dishwasher.

PLASTIC CARBONATING BOTTLE CARE

• For Plastic Carbonating Bottles which are not "dishwasher safe", to clean, rinse Plastic Carbonating Bottles with cold or lukewarm water.
  
  Do not expose to heat above 50°C/120°F. Never wash or rinse in hot water. Do not wash in dishwasher.
• For "dishwasher safe" Plastic Carbonating Bottles, to clean, either wash in dishwasher or rinse Plastic Carbonating Bottles with cold or lukewarm water.
  
  Do not expose to heat above 70°C/158°F.

FOR YOUR SAFETY

SAVE THESE INSTRUCTIONS AND PROVIDE THEM TO ANY SUBSEQUENT USERS.

Before using the Sparkling Water Maker, to reduce risk of personal injury and damage to your product, please read this important safety information.
Before allowing anyone to use your Sparkling Water Maker, please be sure they understand how to do so safely. Any servicing or repair should be performed by a SodaStream-authorized service representative. The Sparkling Water Maker is only intended for use by people over the age of 12. People with reduced physical or mental capabilities should only use the product if they are supervised by an adult responsible for their safety and after they have been given instruction concerning the safe use of the product.
TO REDUCE THE RISK OF EITHER SERIOUS INJURY OR DAMAGE TO THE SPARKLING WATER MAKER DURING CARBONATION:

• Only use your Sparkling Water Maker in its upright position, on a flat, stable surface.
• Do not place your Sparkling Water Maker on a hot surface (e.g. kitchen oven/stove) and never use it close to a flame or leave in direct sunlight.
• Carbonate water only.
• Do not carbonate after flavor has been added. Other liquids (except water) can contaminate and clog internal parts, potentially resulting in excessive pressure and bottle failure during carbonation.
• Do not use the Sparkling Water Maker if the carbonating tube is broken or missing.
• Check that your Glass Carbonating Carafe / Plastic Carbonating Bottle is properly in place before carbonating.
• Do not move your Sparkling Water Maker or try to open the bottle flask during carbonation.
• Do not carbonate an empty Glass Carbonating Carafe / Plastic Carbonating Bottle.

CARBON DIOXIDE CO₂ CYLINDER
To reduce the risk of a CO₂ leak, personal injury and property damage:

• Do not use any cylinder other than the SodaStream CO₂ Quick Connect Cylinder compatible with the E-DUO^TM Pink Handle System.
• Do not insert a CO₂ Cylinder into the Sparkling Water Maker when a Carbonating Bottle is installed.
• Do not use if damaged. Inspect the CO₂ Cylinder and CO₂ Cylinder valve prior to use for dents, punctures, or other damage. If damaged, contact a SodaStream-authorized service representative.
• Do not tamper with the CO₂ Cylinder in any way, including puncturing, incinerating or removing the valve.
• Do not expose the CO₂ Cylinder to heat above 50°C/120°F. Protect from sunlight. Store in a well-ventilated area.
• Do not remove a CO₂ Cylinder from the Sparkling Water Maker when it is being operated.
• Do not handle or remove a CO₂ Cylinder while it is discharging CO₂.
• In the event of a CO₂ leak, ventilate the area, breathe fresh air and if feeling unwell seek immediate medical attention.

SODASTREAM^® GLASS CARBONATING CARAFE
To reduce the risk of bottle failure which can result in personal injury and property damage:

• Do not use the glass carbonating carafe if it is cracked, chipped or damaged in any way. Dispose of the glass carbonating carafe immediately and replace it with a new one.
• Do not use a glass carbonating carafe, other than original SodaStream glass carbonating carafe that is suitable for the SodaStream^® E-DUO^TM.
• Do not subject the glass carbonating carafe to extreme temperature fluctuations (e.g. do not put hot water in a cold glass carbonating carafe).
• Do not place the Glass Carbonating Carafe in the freezer or in extreme cold below 1°C/34°F.
• 
  In the rare event that your Glass Carbonating Carafe breaks during carbonation inside your Sparkling Water Maker do not open the carbonating flask. Any broken glass particles will be safely contained inside the carbonating flask. Please call your local SodaStream customer service representative for assistance.

PLASTIC CARBONATING BOTTLE:
To reduce the risk of bottle failure which can result in personal injury:

• For Plastic Carbonating Bottles not marked as "dishwasher safe", do not expose to heat above 50°C/120°F. Never wash or rinse in hot water. Do not wash in dishwasher.
• For "dishwasher safe" Plastic Carbonating Bottles, do not expose to heat above 70°C/158°F.
• Do not place the Plastic Carbonating Bottle next to a heat source such as your kitchen oven/stove.
• Do not leave the Plastic Carbonating Bottle in a car.
• Do not place the Plastic Carbonating Bottle in the freezer or in extreme cold below 1°C/34°F.
• Do not use the Plastic Carbonating Bottle if damaged, deformed, changes in shape, scratched, worn, or discolored.
• Do not use a Plastic Carbonating Bottle after its expiration date.
• Only carbonate with Plastic Carbonating Bottles specifically designed to work with this Sparkling Water Maker, as shown above.

SAFE USE OF ELECTRICAL APPLIANCES:
When using electrical appliances the following safety precautions should always be followed to reduce the risk of fire, electric shock, and personal injury:

• To protect against electric shock DO NOT place the cord, plug or E-DUO^TM Sparkling Water Maker in water or in any liquids;
• DO NOT operate the E-DUO^TM Sparkling Water Maker with a damaged cord or plug;
• DO NOT let the cord hang over the edge of the table or counter or touch hot surfaces;
• DO NOT use the E-DUO^TM Sparkling Water Maker outdoors.

Only use the power adapter and power lead supplied with the E-DUO^TM Sparkling Water Maker.
Using a different power adapter or lead may cause damage to the E-DUO^TM Sparkling Water Maker and to the power adapter. If the power adapter (including the power lead and plug) becomes damaged, contact your local SodaStream Customer Service to obtain a replacement.

FOR BOTTLE WITH WARNING ICONS:

FOR DISHWASHER-SAFE BOTTLES

REGISTER NOW! AND UPGRADE YOUR SODASTREAM EXPERIENCE
scan or go to sodastream.com/regED