Delta 50-770 Instruction Manual
  1. Manuals
  2. Brands
  3. Delta Manuals
  4. Dust Collector
  5. 50-770
  6. Instruction manual

Delta 50-770 Instruction Manual

Delta portable single-stage dust collector instruction manual
Hide thumbs
Table of Contents

Advertisement

Quick Links

Portable Single-Stage
Dust Collector
(Model 50-770)
PART NO. 902117 (015)
Copyright © 2001 Delta Machinery
To learn more about DELTA MACHINERY
ESPAÑOL: PÁGINA 15
visit our website at: www.deltamachinery.com.
For Parts, Service, Warranty or other Assistance,
1-800-223-7278 (
1-800-463-3582).
please call
In Canada call

Advertisement

Table of Contents
loading

Related Manuals for Delta 50-770

Summary of Contents for Delta 50-770

  • Page 1 Portable Single-Stage Dust Collector (Model 50-770) PART NO. 902117 (015) Copyright © 2001 Delta Machinery To learn more about DELTA MACHINERY ESPAÑOL: PÁGINA 15 visit our website at: www.deltamachinery.com. For Parts, Service, Warranty or other Assistance, 1-800-223-7278 ( 1-800-463-3582). please call...

  • Page 2: General Safety Rules

    If you have any questions relative to a particular application, DO NOT use the machine until you have first contacted Delta to determine if it can or should be performed on the product.

  • Page 3: Important Safety Rules For Dust Collectors

    11. REPLACE a damaged cord immediately. DO NOT use a damaged cord or plug. If the dust collector is not operating properly, or has been damaged, left outdoors or has been in contact with water, take it to an Authorized Service Center for service.

  • Page 4: Unpacking And Cleaning

    This coating may be removed with a soft cloth moistened with kerosene (do not use acetone, gasoline or lacquer thinner for this purpose). After cleaning, cover the unpainted surfaces with a good quality household floor paste wax. 1. Dust collector 2. Hose 3. Dust bag 4.
  • Page 5 2. Place the dust collector on its side. 2. Insert bolt from wheel caster through the four holes (A) Fig. 3 in the base of the dust collector. 3. Place a lockwasher (A) Fig. 4 onto each bolt. 4. Thread hex nut (B) Fig. 4 onto each of the four bolt heads and tighten securely.
  • Page 6 ASSEMBLING DUSTPORT TUBE AND CONNECTOR TO DUST COLLECTOR BODY 1. Place tube clamp (A) Fig. 7 on the lower support tube holder (B). 2. Insert the tube support bracket (A) into the tube support holder (B) as shown in Fig. 8.
  • Page 7 4. Align the two holes in the intake support angle brace (A) Fig. 10 with the two holes in the intake funnel (B). 5. Fasten the intake support angle brace to the intake funnel by inserting the two 5/16-18x5/8" button head carriage bolts (C) thru the intake funnel (B) and the intake support angle brace (A) as shown in Fig.
  • Page 8 ASSEMBLING VACUUM HOSE TO DUST COLLECTOR 1. Place the intake cap holder (D) on the dust collector as shown in Fig. 15. NOTE: DO NOT COVER THE INTAKE PORT WITH THE INTAKE CAP WHEN ATTACHING THE HOSE TO THE INTAKE PORT.

  • Page 9: Grounding Instructions

    Check with a qualified electrician or service person if you are in doubt as to whether the outlet is properly grounded. Do not modify the plug provided with the dust collector. If it will not fit the outlet, have a proper outlet installed by a qualified electrician.

  • Page 10: Extension Cords

    Should you desire to have your dust collector converted for 240 volts, take your dust collector to your local Authorized Delta Service Center. Call 1-800-223-7278 for the location of the nearest Authorized Service Center. The Service Center will be able to convert your dust collector for 240 volts by (a) re-wiring the motor for 240 volts;...
  • Page 11 THE DUST INTAKE PORT.ALWAYS FOLLOW THE SAFETY RULES OF THIS MANUAL. STARTING AND STOPPING DUST COLLECTOR The ON/OFF power switch (A) Fig. 24, is located on the side of the motor. To turn the machine “ON”, move the toggle switch (B) towards the “ON” position. To turn the switch “OFF”, move the toggle switch (B) towards the...
  • Page 12 This versatile dust collector is light, compact and can easily be transported to a variety of locations for use in and out of the workshop. This dust collector can be used with many different types of woodworking machinery as shown in Figs. 26, 27, and 28. This dust...

  • Page 13: Transportation And Storage

    All maintenance other than the items recommended in this manual should be performed by an authorized Delta Service Center. WARNING: Always disconnect the machine from the power source before performing any maintenance procedures.

  • Page 14: Parts, Service Or Warranty Assistance

    1-800-223-7278 (In Canada call 1-800-463-3582). Delta will repair or replace, at its expense and at its option, any Delta machine, machine part, or machine accessory which in normal use has proven to be defective in workmanship or material, provided that the customer returns the product prepaid to a Delta factory service center or authorized service station with proof of purchase of the product within two years and provides Delta with reasonable opportunity to verify the alleged defect by inspection.

Table of Contents